Nissan Murano: Steering / Steering System :: Dtc/circuit Diagnosis

Steering Gear and Linkage

Inspection BOOTCheck boot for cracks. Replace if any damage is found.OUTER SOCKET AND INNER SOCKET Ball joint swinging torque Hook the Tool at the measuring point and pull the Tool...

Heated Steering Wheel System

Component Function Check CHECK HEATED STEERING WHEEL SYSTEM Check operation of heated steering wheel system. Refer to System Description. Is the inspection result normal? YES>> Inspection End...

Other information:

Nissan Murano (Z52) 2015-2024 Owners Manual: MOD system operation

The MOD system will turn on automatically under the following conditions: When the shift lever is in the R (Reverse) position. When vehicle speed decreases below approximately 6 mph (10 km/h) and the camera screen is displayed. Front and bird’s-eye views The MOD system operates in the following conditions when the camera view is displayed: When the shift lever is in the P (Park) orN (Neutral) position and the vehicle is stopped, theMODsystem detectsmoving objects in the bird’s-eye view...

Nissan Murano (Z52) 2015-2024 Service Manual: P1078 Evt Control Position Sensor

DTC Description DTC DETECTION LOGICAn excessively high or low voltage from the sensor is sent to ECM. DTC CONSULT screen terms (Trouble diagnosis content) DTC detection condition P1078 EXH TIM SEN/CIRC-B1 [Exhaust valve timing (EVT) control position sensor (bank 1) circuit] Diagnosis condition Start engine and let it idle Signal (terminal) Voltage signal transmitted from EVT control position sensor to ECM Threshold An excessively high or low voltage from the sensor is sent to ECM Diagnosis delay time — P1084 EXH TIM SEN/CIRC-B2 [Exhaust valve timing (EVT) control position sensor (bank 2) circuit] Diagnosis condition Start engine and let it idle Signal (terminal) Voltage signal transmitted from EVT control position sensor to ECM Threshold An excessively high or low voltage from the sensor is sent to ECM Diagnosis delay time — POSSIBLE CAUSEDTC P1078 Harness or connectors [EVT control position sensor (bank 1) circuit is open or shorted...