Other information:
DTC Description
Located in IPDM E/R, the starter relay runs the starter motor. The starter relay is turned ON by the BCM when ignition switch is in START position. IPDM E/R transmits the starter relay ON signal to BCM via CAN communication.DTC DETECTION LOGICNOTE:
If DTC B210D is displayed with DTC U1000, first perform the trouble diagnosis for DTC U1000...
Component Function Check
DATA MONITOR
CONSULT
Select “TILT SW-UP”, “TILT SW-DOWN” in “Data Monitor” mode of “AUTO DRIVE POS.”.
Check that the function operates normally according to the following conditions:
Monitor item Condition Status
TILT SW-UP
Tilt switch (up)
Operate
ON
Release
OFF
TILT SW-DOWN
Tilt switch (down)
Operate
ON
Release
OFF
Is the inspection result normal?
YES>>
Inspection End...