Nissan Murano: Diagnosis System (bcm) / Signal Buffer

Nissan Murano (Z52) 2015-2024 Service Manual / Electrical & Power Control / Body Control System :: Bcm / System Description / Diagnosis System (bcm) / Signal Buffer

CONSULT Function (BCM - SIGNAL BUFFER)

ECU IDENTIFICATION

The BCM part number is displayed.

SELF DIAGNOSTIC RESULT

Refer to DTC Index.

DATA MONITOR

Monitor Item [Unit]	Description
PUSH SW [On/Off]	Indicates condition of the push-button ignition switch.

ACTIVE TEST

Test Item	Description
OIL PRESSURE SW	This test is able to check the oil pressure warning lamp operation [On/Off].
BRAKE SW	This test is able to check the brake switch operation [On/Off].

Retained Pwr

CONSULT Function (BCM - RETAINED PWR) ECU IDENTIFICATIONThe BCM part number is displayed.SELF DIAGNOSTIC RESULTRefer to DTC Index.DATA MONITOR Monitor Item [Unit] Description DOOR SW-DR [On/Off] Indicates condition of front door switch LH...

Air Pressure Monitor

CONSULT Function (BCM-AIR PRESSURE MONITOR) ECU IDENTIFICATIONThe BCM part number is displayed.SELF DIAGNOSTIC RESULTRefer to DTC Index.DATA MONITOR Monitor Item [Unit] Description AIR PRESS FL [kPa, kg/cm2 or Psi] Indicates air pressure of front LH tire...

Other information:

Nissan Murano (Z52) 2015-2024 Service Manual: B1321 Front Right Tweeter

DTC Description DTC DETECTION LOGIC DTC No. CONSULT screen terms (Trouble diagnosis content) DTC detection condition B1321–13 Front right tweeter (Instrument panel tweeter RH) [OPEN] Diagnosis condition When ignition switch is ON. Signal (terminal) FR SP RH+ (terminal 11) FR SP RH− (terminal 12) Threshold – Diagnosis delay time 30 seconds or more POSSIBLE CAUSE FR SP RH+ open FR SP RH− open Instrument panel tweeter RH AV control unit FAIL-SAFEInstrument panel tweeter RH inoperative Confirmation Procedure PERFORM DTC CONFIRMATION PROCEDURE CONSULT Ignition switch ON...

Nissan Murano (Z52) 2015-2024 Service Manual: Seat Back Blower

Component Function Check CHECK SEAT BACK BLOWER FUNCTION When turning the climate controlled seat switch to the COOL mode position, check that the seat back blower is operated in each specific mode. Is the inspection result normal? YES>> Inspection End...