Nissan Murano: Electrical & Power Control / Body Control System :: Bcm

Power Outlet :: Service Data and Specifications (sds). Service Data and Specifications (sds)

..

Precaution. Precautions

Precaution for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT BELT PRE-TENSIONER" The Supplemental Restraint System such as “AIR BAG” and “SEAT BELT PRE-TENSIONER”, used along with a front seat belt, helps to reduce the risk or severity of injury to the driver and front passenger for certain types of collisions...

Other information:

Nissan Murano (Z52) 2015-2024 Service Manual: Ascd Indicator

Component Function Check CHECK ASCD INDICATOR FUNCTION Check ASCD indicator under the following conditions. ASCD INDICATOR CONDITION SPECIFICATION CRUISE Ignition switch: ON MAIN switch: Pressed at the 1st time → at the 2nd time ON → OFF Is the inspection result normal? YES>> INSPECTION END NO>> Proceed to Diagnosis Procedure...

Nissan Murano (Z52) 2015-2024 Service Manual: A/c Auto Amp.

Values on the Diagnosis Tool NOTE: The following table includes information (items) inapplicable to this Nissan Murano vehicle: For information (items) applicable to this vehicle, refer to CONSULT display items. Monitor item Condition Value/Status AMB TEMP SEN Ignition switch ON — Equivalent to ambient temperature IN-VEH TEMP Ignition switch ON — Equivalent to in-Nissan Murano vehicle temperature (front side) INT TEMP SEN Ignition switch ON — Equivalent to front evaporator fin temperature SUNLOAD SEN Ignition switch ON — Equivalent to sunload (driver side) AMB SEN CAL Ignition switch ON — Equivalent to ambient temperature IN-VEH CAL Ignition switch ON — Equivalent to in-Nissan Murano vehicle temperature (front side) INT TEMP CAL Ignition switch ON — Equivalent to front evaporator fin temperature SUNL SEN CAL Ignition switch ON — Equivalent to sunload (driver side) COMP REQ SIG Engine: Run at idle after warming up A/C switch: ON (Compressor operation status ON) On A/C switch: OFF (Compressor operation status OFF) Off FAN REQ SIG Engine: Run at idle after warming up Front blower motor: ON On Front blower motor: OFF Off FAN DUTY Engine: Run at idle after warming up Front blower motor: ON 25 – 81 Front blower motor: OFF 0 XM Ignition switch ON — Value according to target air flow temperature (driver side) PA TARGET A/TEMP Ignition switch ON — Value according to target air flow temperature (passenger side) ENG COOL TEMP Ignition switch ON — Equivalent to engine coolant temperature Nissan Murano Vehicle SPEED Driving — Equivalent to speedometer reading PASS SUNL CAL Ignition switch ON — Equivalent to sunload (passenger side) PASS SUNL SEN CAL Ignition switch ON — Equivalent to sunload (passenger side) Reference Value TERMINAL LAYOUTPHYSICAL VALUES Terminal No...