Nissan Murano: Removal and Installation / Sensor Rotor

Rear Wheel Sensor

Exploded View RH Side 1. Rear wheel sensor A. Rear wheel sensor bracket B. Clip C. Harness connector D. Refer to Removal and Installation...

Front Sensor Rotor

Removal and Installation - Front Sensor Rotor The front wheel sensor rotor is an integral part of the wheel hub and bearing and cannot be disassembled...

Other information:

Nissan Murano (Z52) 2015-2024 Service Manual: P0078 Evt Control Solenoid Valve

DTC Description DTC DETECTION LOGICAn improper voltage is sent to the ECM through exhaust valve timing control solenoid valve. DTC CONSULT screen terms (Trouble diagnosis content) DTC detection condition P0078 EX V/T ACT/CIRC-B1 [Exhaust valve timing control solenoid valve (bank 1) circuit] Diagnosis condition Start engine and let it idle Signal (terminal) Voltage signal transmitted from exhaust valve timing control solenoid valve to ECM Threshold An improper voltage is sent to the ECM through exhaust valve timing control solenoid valve Diagnosis delay time — P0084 EX V/T ACT/CIRC-B2 [Exhaust valve timing control solenoid valve (bank 2) circuit] Diagnosis condition Start engine and let it idle Signal (terminal) Voltage signal transmitted from exhaust valve timing control solenoid valve to ECM Threshold An improper voltage is sent to the ECM through exhaust valve timing control solenoid valve Diagnosis delay time — POSSIBLE CAUSEP0078 Harness or connectors (Exhaust valve timing control solenoid valve circuit is open or shorted...

Nissan Murano (Z52) 2015-2024 Service Manual: U0428 Steering Angle Sensor

DTC Description DTC DETECTION LOGIC DTC No. CONSULT screen terms (Trouble diagnosis content) DTC detection condition U0428 ST ANGLE SENSOR CALIBRATION (Steering angle sensor calibration) Diagnosis condition When ignition switch is ON Signal (terminal) — Threshold — Diagnosis delay time — POSSIBLE CAUSE Neutral position adjustment of steering angle sensor is not complete Steering angle sensor FAIL-SAFE Predicted course line is not displayed MOD (Moving Object Detection) function is stopped DTC Confirmation Procedure CHECK DTC PRIORITY If DTC U0428 is displayed with DTC U1232, first perform the diagnosis for DTC U1232...