Other information:
Diagnosis Procedure
When the ignition switch is placed ON, the low tire pressure warning lamp blinks. And then 1 minute later, low tire pressure warning lamp turns ON.NOTE:
The position of an inactive tire pressure sensor can be identified by checking the blinking timing of the low tire pressure warning lamp...
DTC Description
DTC DETECTION LOGIC DTC No. CONSULT screen terms DTC detection condition
C1A17–(44, 45, 46, 47, 48, 49)
CONTROL UNIT
Diagnosis condition
When Ignition switch is ON.
Signal (terminal)
—
Threshold
If distance sensor (ICC sensor) is malfunctioning
Diagnosis delay time
—
NOTE:
If any DTC “C1A17” is detected along with DTC “U1000”, first diagnose the DTC “U1000”...