Nissan Murano: Body Control System :: Bcm / Removal and Installation

Normal Operating Condition

Description SHIPPING MODE Shipping mode inhibits battery power consumption during transportation or storage of the Nissan Murano vehicle. Vehicle is set to shipping mode before being shipped from the factory...

Bcm

Removal and Installation CAUTION: Before replacing the BCM, perform “READ CONFIGURATION” to save or print current Nissan Murano vehicle specification...

Other information:

Nissan Murano (Z52) 2015-2024 Service Manual: P062f Ecm

DTC Description DTC DETECTION LOGIC ECM back up system does not function properly. EEPROM (built-in microcomputer) system internal ECM does not function properly. DTC CONSULT screen terms (Trouble diagnosis content) DTC detection condition P0603 ECM BACK UP/CIRCUIT [Internal Control Module Keep Alive Memory (KAM) Error] Diagnosis condition Ignition switch ON Signal (terminal) — Threshold ECM back up system does not function properly Diagnosis delay time — P062F CONTROL MODULE (Internal control module EEPROM error) Diagnosis condition Start engine and let it idle Signal (terminal) — Threshold EEPROM (built-in microcomputer) system internal ECM does not function properly Diagnosis delay time — POSSIBLE CAUSEDTC P0603 Harness or connectors [ECM power supply circuit is open or shorted...

Nissan Murano (Z52) 2015-2024 Service Manual: Automatic Back Door Switch

Diagnosis Procedure Automatic back door open/close function does not operate using automatic back door switch.NOTE: Automatic back door open/close operation condition is extremely complicated. During operating confirmations, reconfirm the list above twice in order to ensure proper operation...