Nissan Murano: Illustrated table of contents / Instrument panel

Nissan Murano (Z52) 2015-2024 Owners Manual / Illustrated table of contents / Instrument panel

Nissan Murano. Instrument panel

  1. Vent
  2. Headlight/fog light (if so equipped)/turn signal switch
  3. Supplemental air bag

    Horn

  4. Meters and gauges

    Warning and indicator lights

    Vehicle information display

  5. Wiper and washer switch

    Rear window wiper and washer switch

  6. Audio system/Center display controls
  7. Hazard warning flasher switch
  8. Center display

    Navigation display (if so equipped)

  9. Front passenger supplemental air bag
  10.  Glove box
  11. Passenger supplemental knee air bag
  12. Front passenger air bag status light
  13. Power outlet
  14. USB ports

    AUX jack

  15. Heater and air conditioning controls
  16. Shift lever
  17. Push-button ignition switch
  18. Cruise control switches (if so equipped)

    Intelligent Cruise Control (ICC) switches (if so equipped)

  19. Driver supplemental knee air bag
  20. Bluetooth® Hands-Free Phone System/Audio control switches
  21. Hood release

    Fuel door release

  22. Fuse box
  23. Heated steering wheel switch (if so equipped)

    Dynamic driver assistance switch (if so equipped)

    Liftgate instrument panel switch (if so equipped)

  24. Instrument brightness control

    Twin trip odometer reset switch

    Passenger compartment

    ..

    Engine compartment check locations

    ..

    Other information:

    Nissan Murano (Z52) 2015-2024 Service Manual: P2127 App Sensor


    DTC Description DTC DETECTION LOGIC An excessively low voltage from the APP sensor 2 is sent to ECM. An excessively high voltage from the APP sensor 2 is sent to ECM. DTC CONSULT screen terms (Trouble diagnosis content) DTC detection condition P2127 APP SEN 2/CIRC (Throttle/Pedal position sensor/switch “E” circuit low) Diagnosis condition Start engine and let it idle Signal (terminal) Voltage signal transmitted from APP sensor 2 to ECM Threshold An excessively low voltage is sent to ECM Diagnosis delay time — P2128 APP SEN 2/CIRC (Throttle/Pedal position sensor/switch “E” circuit high) Diagnosis condition Start engine and let it idle Signal (terminal) Voltage signal transmitted from APP sensor 2 to ECM Threshold An excessively high voltage is sent to ECM Diagnosis delay time — POSSIBLE CAUSEDTC P2127 Harness or connectors (APP sensor 2 circuit is open or shorted...

    Nissan Murano (Z52) 2015-2024 Service Manual: B261a Push-Btn Ign Sw


    DTC Description DTC DETECTION LOGIC DTC No. CONSULT screen terms (Trouble diagnosis content) DTC Detection Condition B261A PUSH-BTN IGN SW (Push-button ignition switch) Diagnosis condition When push-button ignition switch is ON. Signal (terminal) Engine start switch signal (Terminal 1) Threshold Less than 8...

    Categories

    Front manual seat adjustment (if so equipped)

    Your vehicle seats can be adjusted manually. For additional information about adjusting the seats, refer to the steps outlined in this section.

    Forward and backward

    Nissan Murano. Front manual seat adjustment (if so equipped)

    read more

     
    Copyright © 2026 www.nimurano.com