Nissan Murano: Body Exterior, Doors, Roof & Vehicle Security / Power Window Control System :: Symptom Diagnosis

Power Window and Door Lock/unlock Switch Rh

Description Main power window and door lock/unlock switch, power window and door lock/unlock switch RH and BCM transmit and receive the signal by power window serial link...

Power Windows Do Not Operate with Main Power Window and Door Lock/unlock Switch

Diagnosis Procedure CHECK BCM POWER SUPPLY AND GROUND CIRCUIT Check BCM power supply and ground circuit. Refer to Diagnosis Procedure. Is the inspection result normal? YES>> GO TO 2...

Other information:

Nissan Murano (Z52) 2015-2024 Service Manual: Rear Suspension :: Unit Removal and Installation. Rear Suspension Member

Exploded View 1. Rear suspension member 2. Rear suspension member stay 3. Rear suspension member stopper Front         Removal and Installation REMOVALRemove the front under cover. Refer to Removal and Installation...

Nissan Murano (Z52) 2015-2024 Service Manual: P0706 Transmission Range Sensor a

DTC Description DTC DETECTION LOGIC DTC CONSULT screen terms (Trouble diagnosis content) DTC detection condition P0706 T/M RANGE SENSOR A (Transmission Range Sensor A Circuit Range/Performance) Diagnosis condition TCM power supply voltage: More than 11 V Signal Transmission range switch signal Threshold All range signals stay OFF Diagnosis delay time Maintained for 30 seconds POSSIBLE CAUSE Harness or connector (Open circuit between ignition switch and transmission range switch/open circuit between transmission range switch and TCM) Transmission range switch Control cable Harness or connector (CAN communication line is error)FAIL-SAFE Shift position indicator on combination meter is not displayed Selector shock is large Start is slow Acceleration is slow Lock-up is not performed DTC Confirmation Procedure PREPARATION BEFORE WORK If another "DTC CONFIRMATION PROCEDURE" occurs just before, turn ignition switch OFF and wait for at least 10 seconds, then perform the next test...