Nissan Murano: Power Window Control System :: Symptom Diagnosis / Keyless Power Window Down Does Not Operate
Diagnosis Procedure
CHECK REMOTE KEYLESS ENTRY FUNCTION
Check remote keyless entry function.
Is the inspection result normal?
YES>>
GO TO 2.
NO>>
Refer to Diagnosis Procedure.
CHECK POWER WINDOW OPERATION
Check power window operation.
In the inspection result normal?
YES>>
GO TO 3.
NO>>
Refer to Diagnosis Procedure.
CONFIRM THE OPERATION
Confirm the operation again.
Is the inspection result normal?
YES>>
Check intermittent incident. Refer to Intermittent Incident.
NO>>
GO TO 1.
Diagnosis Procedure
CHECK POWER WINDOW AUTO OPERATION
Check AUTO operation of the door when anti-pinch function does not operate.
Is the inspection result normal?
YES>>
GO TO 2...
Diagnosis Procedure
REPLACE MAIN POWER WINDOW AND DOOR LOCK/UNLOCK SWITCH
Replace main power window and door lock/unlock switch. Refer to Removal and Installation...
Other information:
Inspection
Connect the Tool between power steering oil pump discharge connector and high-pressure hose. Bleed air from the hydraulic circuit while opening valve fully. Refer to Air Bleeding Hydraulic System.
Tool numbers
: KV48103500 (J-26357)
: KV48102500 (J-33914)
Start engine...
Component Function Check
CHECK FUNCTION
CONSULT
Select “HOOD SW” and "HOOD SW 2" in “Data Monitor” mode of “IPDM E/R”.
Check “HOOD SW” and "HOOD SW 2" indication under the following conditions:
Monitor item Condition Indication
HOOD SW
Hood
Open
OFF
Close
ON
HOOD SW 2
Open
ON
Close
OFF
Is the indication normal?
YES>>
Hood switch is OK...