Nissan Murano: Blower Unit / Blower Unit
Exploded View

| 1. |
Blower unit |
2. |
Heating and cooling unit |
 |
Front |
Removal and Installation
REMOVAL
Remove the heating and cooling unit assembly. Refer to Removal and Installation.
Disconnect the harness connector from the blower motor.
Remove the screw and then the blower unit from the heating and cooling unit assembly.
INSTALLATION
Installation is in the reverse order of removal.
Removal and Installation
REMOVALRemove the glove box assembly. Refer to Removal and Installation.
Disconnect the harness connector (B) from the blower motor...
Other information:
Component Function Check
CHECK FUNCTION
CONSULT
Select "Nissan Murano Vehicle SECURITY HORN" in "Active Test" mode of "BCM(THEFT ALM)".
Check the horn operation.
Test item Description
Nissan Murano Vehicle SECURITY HORN
ON
Horn
Sounds (for 0...
Exploded View
Oil seal
Transfer cover
Filler plug
Gasket
Drain plug
Oil seal
O-ring
Ring gear bearing adjusting shim (transfer cover side)
Ring gear bearing (transfer cover side)
Drive shaft oil seal
Ring gear shaft
Ring gear bearing (transfer case side)
Ring gear bearing adjusting shim (transfer case side)
Ring gear
Baffle plate
Transfer case
Plug
O-ring
Oil seal
Dowel pin
Drive pinion
Drive pinion adjusting shim
O-ring
Pinion bearing assembly
Oil seal
Dust cover
Companion flange
Pinion lock nut
Oil seal lip
Comply with the assembly procedure when tightening...
Categories

Your vehicle has two types of security systems:
Vehicle security system
NISSAN Vehicle Immobilizer System
The vehicle security system provides visual
and audible alarm signals if someone
opens the doors, liftgate or the hood when
the system is armed. It is not, however, a
motion detection type system that activates
when a vehicle is moved or when a
vibration occurs.
read more