Nissan Murano: Power Window Control System :: Symptom Diagnosis / Power Window Lock Switch Does Not Function

Keyless Power Window Down Does Not Operate

Diagnosis Procedure CHECK REMOTE KEYLESS ENTRY FUNCTION Check remote keyless entry function. Is the inspection result normal? YES>> GO TO 2. NO>> Refer to Diagnosis Procedure...

Power Window Switch Does Not Illuminate

..

Other information:

Nissan Murano (Z52) 2015-2024 Service Manual: P0222 Tp Sensor

DTC Description DTC DETECTION LOGIC An excessively low voltage from the TP sensor 1 is sent to ECM. An excessively high voltage from the TP sensor 1 is sent to ECM. DTC CONSULT screen terms (Trouble diagnosis content) DTC detection condition P0222 TP SEN 1/CIRC-B1 (Throttle/Pedal position sensor/switch “B” circuit low) Diagnosis condition Start engine and let it idle Signal (terminal) Voltage signal transmitted from TP sensor 1 to ECM Threshold An excessively low voltage from the TP sensor 1 is sent to ECM Diagnosis delay time — P0223 TP SEN 1/CIRC-B1 (Throttle/Pedal position sensor/switch “B” circuit high) Diagnosis condition Start engine and let it idle Signal (terminal) Voltage signal transmitted from TP sensor 1 to ECM Threshold An excessively high voltage from the TP sensor 1 is sent to ECM Diagnosis delay time — POSSIBLE CAUSEP0222 Harness or connectors (TP sensor 1 circuit is open or shorted...

Nissan Murano (Z52) 2015-2024 Service Manual: Main Power Window and Door Lock/unlock Switch

Removal and Installation REMOVAL Pull armrest in direction shown () then starting at rear release main power window and door lock/unlock switch finisher (1) pawls using a suitable tool (A). : Front : Pawl Disconnect the harness connectors (A) from the main power window and door lock/unlock switch (1) and harness connector (B) from the door mirror remote control switch (2) and remove...