Nissan Murano: Engine Control System :: Vq35de / Periodic Maintenance

Nissan Murano (Z52) 2015-2024 Service Manual / Engine / Engine Control System :: Vq35de / Periodic Maintenance

Normal Operating Condition

Description FUEL CUT CONTROL (AT NO LOAD AND HIGH ENGINE SPEED)If the engine speed is above 2,000 rpm under no load (for example, the selector lever position is P or N and engine speed is over 2,000 rpm) fuel will be cut off after some time...

Idle Speed

Work Procedure CHECK IDLE SPEED With CONSULT Check idle speed in “DATA MONITOR” mode with CONSULT. With GST Check idle speed with Service $01 of GST...

Other information:

Nissan Murano (Z52) 2015-2024 Service Manual: System. Power Distribution System


System Description SYSTEM DIAGRAMSignal transmission function list Signal name Input Output Description Push-button ignition switch signal Push-button ignition switch BCM Transmits the push-button ignition switch signal to the BCM. ACC/ON indicator lamp signal BCM Push-button ignition switch Activates/deactivates push-button ignition switch illumination using the ACC/ON indicator lamp signal...

Nissan Murano (Z52) 2015-2024 Service Manual: Lh Seat


Seatback DISASSEMBLYWARNING: Do not leave any objects (screwdrivers, tools, etc.) on the seat during seatback repair. It can lead to personal injury if the side air bag module should accidentally deploy. CAUTION: Before servicing, place ignition switch in the OFF position, disconnect both battery terminals then wait at least three minutes...

Categories

Luggage hooks

Nissan Murano. Luggage hooks

When securing items using luggage hooks located on the back of the seat or side finisher do not apply a load over more than 6.5 lbs. (29 N) to a single hook.

The luggage hooks that are located on the floor should have loads less than 110 lbs. (490 N) to a single hook.

read more

 
Copyright © 2026 www.nimurano.com