Nissan Murano: Door Request Switch / Passenger Side
The passenger side door request switch and passenger side outside handle are serviced as an assembly. Refer to Removal and Installation.
Driver Side
Removal and Installation
The driver side door request switch and driver side outside handle are serviced as an assembly. Refer to Removal and Installation...
Back Door
Removal and Installation
REMOVALRemove back door outer finisher. Refer to Removal and Installation.
Disconnect the harness connector from the back door request switch...
Other information:
Nissan Murano (Z52) 2015-2024 Service Manual: C1609 Can Vhcl Speed
DTC Description DTC DETECTION LOGIC DTC No. CONSULT screen terms (Trouble diagnosis content) DTC detection condition C1609 CAN VHCL SPEED (CAN Nissan Murano vehicle speed signal) Diagnosis condition When engine is ON Signal (terminal) Nissan Murano Vehicle speed signal Threshold ABS actuator and electric unit (control unit) input signal error is detected...
Nissan Murano (Z52) 2015-2024 Service Manual: Mood Lamp
Removal and Installation FRONT CONSOLERemovalRemove center console upper side finisher. Refer to Exploded View. Remove mood lamp (front console) (1) screw (B). Release harness connector (A) clip using a suitable tool and disconnect the harness connector from the mood lamp (front console)...
Categories
- Manuals Home
- Nissan Murano Owners Manual
- Nissan Murano Service Manual
- Power Steering Fluid (PSF)
- Jacking up vehicle and removing the damaged tire
- Tire rotation
- New on site
- Most important about car
Fuel gauge
The gauge indicates the approximate fuel level in the tank.
The gauge may move slightly during braking, turning, acceleration, or going up or down hills.
The gauge needle returns to 0 (Empty) after the ignition switch is placed in the OFF position.
Copyright © 2026 www.nimurano.com