Nissan Murano: Door & Lock :: Removal and Installation / Door Request Switch

Door Switch

Removal and Installation REMOVALRemove door switch bolt (A). Disconnect the harness connector from the door switch (1) and remove.INSTALLATIONInstallation is in the reverse order of removal...

Driver Side

Removal and Installation The driver side door request switch and driver side outside handle are serviced as an assembly. Refer to Removal and Installation...

Other information:

Nissan Murano (Z52) 2015-2024 Owners Manual: Trailer frontal area

CAUTION Exceeding the maximum trailer frontal area specification may exceed the towing capacity of the vehicle. This may affect the towing performance and lead to vehicle damage. The trailer frontal area affects the towing load of a trailer. The frontal area is the total area of the vehicle and trailer that is affected by air resistance while towing...

Nissan Murano (Z52) 2015-2024 Service Manual: Ecu Diagnosis Information. 3ch Can Gateway

Reference Value TERMINAL LAYOUTPHYSICAL VALUES Terminal No. (Wire color) Description Condition Standard Reference value + – Signal name Input/ Output 1 (L) — Nissan Murano Vehicle CAN communication-H Input/ Output — — — 2 (P) — Nissan Murano Vehicle CAN communication-L Input/ Output — — — 3 (L) — Diagnostic CAN communication-H Input/ Output — — — 4 (P) — Diagnostic CAN communication-L Input/ Output — — — 5 (BG) 6 (B) 7 (B) Ignition power supply Input Ignition switch ON 7 – 16 V Battery voltage 8 (BG) 6 (B) 7 (B) Battery power supply Input Ignition switch OFF 6 – 16 V Battery voltage 9 (L) — IT CAN communication-H — — — — 10 (P) — IT CAN communication-L — — — — 11 (L) — Diagnostic CAN communication-H Input/ Output — — — 12 (P) — Diagnostic CAN communication-L Input/ Output — — — 13 (L) — IT CAN communication-H — — — — 14 (P) — IT CAN communication-L — — — — DTC Inspection Priority Chart If some DTCs are displayed at the same time, perform inspections one by one based on the following priority chart...