Nissan Murano: Seat :: Dtc/circuit Diagnosis / Seat Back Blower

Nissan Murano (Z52) 2015-2024 Service Manual / Body Interior / Seat :: Dtc/circuit Diagnosis / Seat Back Blower

Component Function Check

CHECK SEAT BACK BLOWER FUNCTION

When turning the climate controlled seat switch to the COOL mode position, check that the seat back blower is operated in each specific mode.

Is the inspection result normal?

YES>>

Inspection End.

NO>>

Refer to Diagnosis Procedure.

Diagnosis Procedure

CHECK SEAT BACK BLOWER POWER SUPPLY

  1. Ignition switch ON.

  2. Check voltage between seat back blower harness connector and ground.

    (+) (–) Condition

    Voltage

    (Approx.)
    Seat back blower
    Connector Terminal
    LH B212 1 Ground Climate controlled seat switch COOL mode Battery voltage
    Other than above 0 V
    RH B308 Climate controlled seat switch COOL mode Battery voltage
    Other than above 0 V

Is the inspection result normal?

YES>>

GO TO 3.

NO>>

GO TO 2.

CHECK SEAT BACK BLOWER POWER SUPPLY CIRCUIT

  1. Ignition switch OFF.

  2. Disconnect seat back blower connector and climate controlled seat control unit connector.

  3. Check continuity between seat back blower harness connector and climate controlled seat control unit harness connector.

    Seat back blower Climate controlled seat control unit Continuity
    Connector Terminal Connector Terminal
    LH B212 1 B203 11 Yes
    RH B308 B320

  4. Check continuity between seat back blower harness connector and ground.

    Seat back blower Ground Continuity
    Connector Terminal
    LH B212 1 Ground No
    RH B308

Is the inspection result normal?

YES>>

Replace climate controlled seat control unit. Refer to Climate Controlled Seat Control Unit.

NO>>

Repair or replace harness.

CHECK SEAT BACK BLOWER SPEED CONTROL SIGNAL

Check voltage between seat back blower harness connector and ground.

(+) (–) Condition

Voltage

(Approx.)
Seat back blower
Connector Terminal
LH B212 2 Ground Climate controlled seat switch COOL HI Battery voltage
MID 9.0 V
LO 8.0 V
Other than above 0 V
RH B308 Climate controlled seat switch COOL HI Battery voltage
MID 9.0 V
LO 8.0 V
Other than above 0 V

Is the inspection result normal?

YES>>

GO TO 5.

NO>>

GO TO 4.

CHECK SEAT BACK BLOWER SPEED CONTROL SIGNAL CIRCUIT

  1. Ignition switch OFF.

  2. Disconnect seat back blower connector and climate controlled seat control unit connector.

  3. Check continuity between seat back blower harness connector and climate controlled seat control unit harness connector.

    Seat back blower Climate controlled seat control unit Continuity
    Connector Terminal Connector Terminal
    LH B212 2 B203 5 Yes
    RH B308 B320

  4. Check continuity between climate controlled seat back blower motor harness connector and ground.

    Seat back blower — Continuity
    Connector Terminal
    LH B212 2 Ground No
    RH B308

Is the inspection result normal?

YES>>

Replace climate controlled seat control unit. Refer to Climate Controlled Seat Control Unit.

NO>>

Repair or replace harness.

CHECK SEAT BACK BLOWER GROUND CIRCUIT

  1. Ignition switch OFF.

  2. Disconnect seat back blower connector and climate controlled seat control unit connector.

  3. Check continuity between seat back blower harness connector and climate controlled seat control unit harness connector.

    Seat back blower Climate controlled seat control unit Continuity
    Connector Terminal Connector Terminal
    LH B212 3 B203 21 Yes
    RH B308 B320

  4. Check continuity between climate controlled seat back blower motor harness connector and ground.

    Seat back blower — Continuity
    Connector Terminal
    LH B212 3 Ground No
    RH B308

Is the inspection result normal?

YES>>

Replace seat back blower. Refer to Exploded View.

NO>>

Repair or replace harness.

    Seat Back Heater Sensor

    Component Function Check CHECK SEAT BACK HEATER FUNCTION Check whether or not the temperature of the seat back heater changes in accordance with the HEAT switch operation of the climate controlled seat control switch...

    Seat :: Symptom Diagnosis

    ..

    Other information:

    Nissan Murano (Z52) 2015-2024 Service Manual: P0451 Pressure Sensor


    DTC Description DTC DETECTION LOGICAn excessively low voltage from the sensor is sent to ECM. DTC CONSULT screen terms (Trouble diagnosis content) DTC detection condition P0451 EVAP SYS PRES SEN (EVAP control system pressure sensor performance) Diagnosis condition Ignition switch ON Signal (terminal) EVAP control system pressure sensor signal ECM (Built in barometric pressure sensor) Threshold ECM detects a state that the pressure difference remains the threshold value or more for continuously for 5 seconds or more under the condition that the pressure of the EVAP control system pressure sensor and that of the barometric pressure sensor are equal...

    Nissan Murano (Z52) 2015-2024 Service Manual: Rear Reflex Reflector


    Exploded View 1. Rear reflex reflector Clip Removal and Installation REMOVALRemove rear bumper fascia. Refer to Removal and Installation. Remove rear reflex reflector fixing screw and pawls and then remove rear reflex reflector.INSTALLATIONInstallation is in the reverse order of removal...

    Categories

    Front manual seat adjustment (if so equipped)

    Your vehicle seats can be adjusted manually. For additional information about adjusting the seats, refer to the steps outlined in this section.

    Forward and backward

    Nissan Murano. Front manual seat adjustment (if so equipped)

    read more

     
    Copyright © 2026 www.nimurano.com