Nissan Murano: LATCH (Lower Anchors and Tethers for CHildren) system / Installing child restraint LATCH lower anchor attachments

LATCH webbing-mounted attachment
LATCH compatible child restraints include
two rigid or webbing-mounted attachments
that can be connected to two anchors
located at certain seating positions
in your vehicle. With this system, you do not
have to use a vehicle seat belt to secure the
child restraint. Check your child restraint for
a label stating that it is compatible with
LATCH. This information may also be in the
instructions provided by the child restraint
manufacturer.

LATCH rigid-mounted attachment
When installing a child restraint, carefully
read and follow the instructions in this
manual and those supplied with the child
restraint.
LATCH lower anchor location
The LATCH lower anchors are located as
shown. A label is attached to the seatback
to help you locate the LATCH lower anchors...
WARNING
Do not allow cargo to contact the top
tether strap when it is attached to the
top tether anchor. Properly secure the
cargo so it does not contact the top
tether strap...
Other information:
Exploded View
1.
Bracket
2.
TCM
Removal and Installation
CAUTION:
To replace TCM, perform "WRITE IP CHARA – REPLACEMENT TCM" of the CONSULT Work Support before removing TCM and save TCM data in CONSULT. Refer to Description...
DTC Description
DTC DETECTION LOGIC DTC No.
CONSULT screen terms
(Trouble diagnosis content) DTC detection condition
B1360–02
Combination meter
(Combination meter connection error)
Diagnosis condition
When ignition switch is ON.
Signal (terminal)
—
Threshold
—
Diagnosis delay time
—
POSSIBLE CAUSE
AV communication circuit is open
Combination meter
FAIL-SAFESteering switch is inoperative
DTC Confirmation Procedure
PERFORM DTC CONFIRMATION PROCEDURE
CONSULT
Ignition switch ON...