Other information:
Description
Always perform the memory storage when the battery terminal is disconnected or the driver seat control unit is replaced. The memory function will not operate normally if no memory storage is performed.
Work Procedure
Memory Storage ProcedureTwo positions for the driver seat, steering column and outside mirror can be stored for memory operation by the following procedure:STEP 1
Check the following conditions:
Ignition switch: ON
CVT shift selector: P (Park) position
>>
GO TO 2...
DTC Description
DTC DETECTION LOGIC DTC No.
CONSULT screen terms
(Trouble diagnosis content) DTC detection condition
B1360–02
Combination meter
(Combination meter connection error)
Diagnosis condition
When ignition switch is ON.
Signal (terminal)
—
Threshold
—
Diagnosis delay time
—
POSSIBLE CAUSE
AV communication circuit is open
Combination meter
FAIL-SAFESteering switch is inoperative
DTC Confirmation Procedure
PERFORM DTC CONFIRMATION PROCEDURE
CONSULT
Ignition switch ON...