Nissan Murano: Removal and Installation / Front Auxiliary Input Jacks Control Unit
Removal and Installation
Removal
Remove A/C switch assembly Removal and Installation.
Disconnect the harness connectors from the front auxiliary input jacks control unit.
Remove the front auxiliary input jacks control unit.
Installation
Installation is in the reverse order of removal.
Exploded View
1.
Steering wheel
2.
Cover
3.
Steering switches
4.
Driver air bag module
A.
Refer to Exploded View.
Pawl
Removal and Installation
REMOVALNOTE:
The steering switches is serviced as an assembly...
Removal and Installation
REMOVALRemove shift selector finisher. Refer to Exploded View.
Release pawls and remove front auxiliary input jacks (1).
: PawlINSTALLATIONInstallation is in the reverse order of removal...
Other information:
The MOD system will turn on automatically
under the following conditions:
When the shift lever is in the R (Reverse)
position.
When vehicle speed decreases below
approximately 6 mph (10 km/h) and the
camera screen is displayed.
Front and bird’s-eye views
The MOD system operates in the following
conditions when the camera view is displayed:
When the shift lever is in the P (Park) orN
(Neutral) position and the vehicle is
stopped, theMODsystem detectsmoving
objects in the bird’s-eye view...
System Description
SYSTEM DIAGRAMINPUT SIGNAL AND OUTPUT SIGNAL CHART Component Signal description
ECM
Mainly transmits the following signal to BCM and combination meter via CAN communication.
Engine status signal
Mainly receives the following signal from BCM via CAN communication...