Nissan Murano: Removal and Installation / Front Auxiliary Input Jacks
Removal and Installation
REMOVAL
Remove shift selector finisher. Refer to Exploded View.
Release pawls and remove front auxiliary input jacks (1).

: Pawl
INSTALLATION
Installation is in the reverse order of removal.
Removal and Installation
RemovalRemove A/C switch assembly Removal and Installation.
Disconnect the harness connectors from the front auxiliary input jacks control unit...
Removal and Installation
REMOVALRemove instrument panel tweeter grille (LH\RH). Refer to Exploded View.
Disconnect the harness connector from instrument panel tweeter and remove screws (A) to remove instrument panel tweeter (1)...
Other information:
Inspection
BOOTCheck boot for cracks. Replace if any damage is found.OUTER SOCKET AND INNER SOCKET
Ball joint swinging torque
Hook the Tool at the measuring point and pull the Tool. Make sure that the Tool reads the specified value when ball stud and inner socket start to move...
DTC Description
DTC DETECTION LOGIC DTC No.
CONSULT screen terms
(Trouble diagnosis content) DTC detection condition
U1A05
USB COMM
(USB comm)
Diagnosis condition
When ignition switch is ON.
Signal (terminal)
—
Threshold
Malfunction in USB communication between TCU and AV control unit
Diagnosis delay time
—
POSSIBLE CAUSE
USB harness
TCU
FAIL-SAFE—
DTC Confirmation Procedure
PERFORM DTC CONFIRMATION PROCEDURE
CONSULT
Ignition switch ON...