Nissan Murano: Dtc/circuit Diagnosis / Front Auxiliary Input Jacks

Nissan Murano (Z52) 2015-2024 Service Manual / Driver Information & Multimedia / Audio, Visual & Navigation System :: Navigation with Bose / Dtc/circuit Diagnosis / Front Auxiliary Input Jacks

Diagnosis Procedure

AUX JACK

CHECK AUX JACK HARNESS CONTINUITY

  1. Ignition switch OFF.

  2. Disconnect AV control unit connector and front auxiliary input jacks connector.

  3. Check continuity between AV control unit connector and front auxiliary input jacks connector.

    AV control unit Front auxiliary input jacks Continuity
    Connector Terminal Connector Terminal
    M162 33 M222 3 Yes
    34 2
    54 1

  4. Check continuity between AV control unit connector and ground.

    AV control unit — Continuity
    Connector Terminal
    M162 34 Ground No
    54

Is the inspection result normal?

YES>>

Replace the front auxiliary input jacks. Removal and Installation.

NO>>

Repair or replace harness or connectors.

USB INTERFACES

CHECK USB 1 INTERFACE HARNESS CONTINUITY

  1. Ignition switch OFF.

  2. Disconnect front auxiliary input jacks connector and front auxiliary input jacks control unit connector.

  3. Check continuity between front auxiliary input jacks connector and front auxiliary input jacks control unit connector.

    Front auxiliary input jacks Front auxiliary input jacks control unit Continuity
    Connector Terminal Connector Terminal
    M223 7 M133 5 Yes
    9 7
    10 8
    11 9
    12 10

  4. Check continuity between front auxiliary input jacks connector and ground.

    Front auxiliary input jacks — Continuity
    Connector Terminal
    M223 9 Ground No
    11

Is the inspection result normal?

YES>>

GO TO 2.

NO>>

Repair or replace harness or connectors.

CHECK USB 2 INTERFACE HARNESS CONTINUITY

  1. Disconnect front auxiliary input jacks connector and front auxiliary input jacks control unit connector.

  2. Check continuity between front auxiliary input jacks connector and front auxiliary input jacks control unit connector.

    Front auxiliary input jacks Front auxiliary input jacks control unit Continuity
    Connector Terminal Connector Terminal
    M224 13 M134 11 Yes
    15 13
    16 14
    17 15
    18 16

  3. Check continuity between front auxiliary input jacks connector and ground.

    Front auxiliary input jacks — Continuity
    Connector Terminal
    M224 15 Ground No
    17

Is the inspection result normal?

YES>>

GO TO 3.

NO>>

Repair or replace harness or connectors.

CHECK USB INTERFACE HARNESS CONTINUITY

  1. Ignition switch OFF.

  2. Disconnect AV control unit connector and front auxiliary input jacks control unit connector.

  3. Check continuity between AV control unit connector and front auxiliary input jacks control unit connector.

    AV control unit Front auxiliary input jacks control unit Continuity
    Connector Terminal Connector Terminal
    M163 61 M135 17 Yes
    63 19
    64 20
    65 21
    66 22

  4. Check continuity between AV control unit connector and ground.

    AV control unit — Continuity
    Connector Terminal
    M163 63 Ground No
    65

Is the inspection result normal?

YES>>

Replace the front auxiliary input jacks. Removal and Installation.

NO>>

Repair or replace harness or connectors.

    Steering Switches

    Diagnosis Procedure CHECK STEERING WHEEL AUDIO CONTROL SWITCH RESISTANCE Ignition switch OFF. Disconnect combination switch connector. Check resistance between the terminals of combination switch connector...

    Symptom Diagnosis

    ..

    Other information:

    Nissan Murano (Z52) 2015-2024 Service Manual: P0112 Iat Sensor


    DTC Description DTC DETECTION LOGIC An excessively low voltage from the sensor is sent to ECM. An excessively high voltage from the sensor is sent to ECM. DTC CONSULT screen terms (Trouble diagnosis content) DTC detection condition P0112 IAT SEN/CIRCUIT-B1 (Intake air temperature sensor 1 circuit low bank 1) Diagnosis condition Ignition switch ON Signal (terminal) Voltage signal transmitted from intake air temperature sensor to ECM Threshold An excessively low voltage from the sensor is sent to ECM Diagnosis delay time — P0113 IAT SEN/CIRCUIT-B1 (Intake air temperature sensor 1 circuit high bank 1) Diagnosis condition Ignition switch ON Signal (terminal) Voltage signal transmitted from intake air temperature sensor to ECM Threshold An excessively high voltage from the sensor is sent to ECM Diagnosis delay time — POSSIBLE CAUSEP0112 Harness and connectors (The sensor circuit is open or shorted...

    Nissan Murano (Z52) 2015-2024 Service Manual: Engine Protection Control at Low Engine Oil Pressure


    System Description SYSTEM DIAGRAMSYSTEM DESCRIPTION The engine protection control at low engine oil pressure warns the driver of a decrease in engine oil pressure by the oil pressure warning lamp before the engine becomes damaged. When detecting a decrease in engine oil pressure at an engine speed less than 1,000 rpm, ECM transmits an oil pressure warning lamp signal to the combination meter...

    Categories

    Autolight system

    Nissan Murano. Autolight system

    The autolight system allows the headlights to turn on and off automatically. The autolight system can:

    Turn on the headlights, front parking, tail, license plate and instrument panel lights automatically when it is dark. Turn off all the lights (except daylight running lights) when it is light. Keep all the lights on for a period of time after you place the ignition switch in the OFF position and all doors are closed.

    read more

     
    Copyright © 2026 www.nimurano.com