Nissan Murano: Recommended fluids/lubricants and capacities / Engine oil and oil filter recommendations

Nissan Murano (Z52) 2015-2024 Owners Manual / Technical and consumer information / Recommended fluids/lubricants and capacities / Engine oil and oil filter recommendations

Nissan Murano. Engine oil and oil filter recommendations

Selecting the correct oil

It is essential to choose the correct grade, quality and viscosity engine oil to ensure satisfactory engine life and performance. For additional information, refer to “Recommended fluids/lubricants and capacities” in this section. NISSAN recommends the use of an energy conserving oil in order to improve fuel economy.

Select only engine oils that meet the American Petroleum Institute (API) certification or International Lubricant Standardization and Approval Committee (ILSAC) certification and SAE viscosity standard. These oils have the API certification mark on the front of the container. Oils which do not have the specified quality label should not be used as they could cause engine damage.

Oil additives

NISSAN does not recommend the use of oil additives. The use of an oil additive is not necessary when the proper oil type is used and maintenance intervals are followed. Oil which may contain foreign matter or has been previously used should not be used.

Oil viscosity

The engine oil viscosity or thickness changes with temperature. Because of this, it is important to select the engine oil viscosity based on the temperatures at which the vehicle will be operated before the next oil change. Choosing an oil viscosity other than that recommended could cause serious engine damage.

Selecting the correct oil filter

Your new NISSAN vehicle is equipped with a high-quality Genuine NISSAN oil filter. When replacing, use a Genuine NISSAN oil filter or its equivalent for the reason described in “Change intervals.”

Change intervals

The oil and oil filter change intervals for your engine are based on the use of the specified quality oils and filters. Using engine oil and filters that are not of the specified quality, or exceeding recommended oil and filter change intervals could reduce engine life. Damage to the engine caused by improper maintenance or use of incorrect oil and filter quality and/or viscosity is not covered by the NISSAN New Vehicle Limited Warranty.

Your engine was filled with a high-quality engine oilwhenit was built.You do not have to change the oil before the first recommended change interval. Oil and filter change intervals depend upon how you use your vehicle.

Operation under the following conditions may require more frequent oil and filter changes:

  • repeated short distance driving at cold outside temperatures
  • driving in dusty conditions
  • extensive idling
  • towing a trailer
  • stop and go commuting

For additional information, refer to the “Maintenance and schedules” section of this manual.

    Fuel recommendation

    Use unleaded regular gasoline with an octane rating of at least 87 AKI (Anti-Knock Index) number (Research octane number 91). CAUTION Only vehicles with the E-85 filler door label canoperateonE-85...

    Air conditioner system refrigerant and oil recommendations

    The air conditioner system in your NISSANvehiclemustbe charged with the refrigerant HFC-134a (R-134a) and NISSAN A/C System Oil Type ND-OIL8 or the exact equivalents...

    Other information:

    Nissan Murano (Z52) 2015-2024 Service Manual: Rab


    System Description SYSTEM DIAGRAMADAS CONTROL UNIT INPUT/OUTPUT SIGNAL ITEMInput Signal Item Transmit unit Signal name Description ECM CAN communication Closed throttle position signal Receives idle position state (ON/OFF) Accelerator pedal position signal Receives accelerator pedal position (angle) Engine speed signal Receives engine speed TCM CAN communication Current gear position signal Receives a current gear position Shift position signal Receives a selector lever position Output shaft revolution signal Receives the number of revolutions of output shaft Input shaft revolution signal Receives the number of revolutions of input shaft ABS actuator and electric unit (control unit) CAN communication ABS malfunction signal Receives a malfunction state of ABS TCS malfunction signal Receives a malfunction state of TCS VDC malfunction signal Receives a malfunction state of VDC Nissan Murano Vehicle speed signal Receives the wheel speed of all four wheels Brake fluid pressure signal Receives brake fluid pressure Steering angle sensor CAN communication Steering angle sensor signal Receives the amount of rotation, rotational angle, and rotational direction of the steering wheel Combination meter CAN communication System selection signal Receives a selection state of each item in "Emergency Brake" selection with the combination meter Sonar control unit CAN communication Sonar sensor signal Receives obstacle information (existence & distance) BCM CAN communication Stop lamp switch signal Receives an operational state of the brake pedal   Output Signal Item Reception unit Signal name Description ECM CAN communication Torque down request signal Transmits a signal to control the electric throttle control actuator...

    Nissan Murano (Z52) 2015-2024 Service Manual: Interior :: Preparation. Preparation


    Special Service Tool The actual shape of the tools may differ from those illustrated here. Tool number (TechMate No.) Tool name   Description   — (J-39570) Chassis Ear Locating the noise   — (J-50397) Squeak and Rattle Kit Repairing the cause of noise   — (J-46534) Trim Tool Set Removing trim components Commercial Service Tools (TechMate No...

    Categories

    Luggage hooks

    Nissan Murano. Luggage hooks

    When securing items using luggage hooks located on the back of the seat or side finisher do not apply a load over more than 6.5 lbs. (29 N) to a single hook.

    The luggage hooks that are located on the floor should have loads less than 110 lbs. (490 N) to a single hook.

    read more

     
    Copyright © 2026 www.nimurano.com