Nissan Murano: Basic Inspection / Predictive Course Line Center Position Adjustment

Nissan Murano (Z52) 2015-2024 Service Manual / Driver Information & Multimedia / Audio, Visual & Navigation System :: Rear View Monitor System / Basic Inspection / Predictive Course Line Center Position Adjustment

Description

Adjust the center position of the predictive course line of the rear view monitor if it is shifted.

Work Procedure

DRIVING

Drive the vehicle straight ahead 100 m (328.1 ft) or more at a speed of 30 km/h (18.6 MPH) or more.

>>

End.

    Additional Service When Replacing Sonar Control Unit

    Description BEFORE REPLACEMENTWhen replacing sonar control unit, save or print current vehicle specification with CONSULT configuration before replacement...

    Dtc/circuit Diagnosis

    ..

    Other information:

    Nissan Murano (Z52) 2015-2024 Service Manual: B2409 Half Latch Sw


    DTC Description DTC DETECTION LOGIC DTC No. CONSULT screen items (Trouble diagnosis content) DTC detecting condition B2409–71 HALF LATCH SW (Half latch switch) Diagnosis condition All times Signal (terminal) Half latch switch signal (automatic back door control module connector terminal: 7) Threshold When all of the following conditions are satisfied Back door: half latch or open Half latch switch: ON → OFF Diagnosis delay time – POSSIBLE CAUSE Entry of foreign materials to back door lock assembly Back door mechanism Half latch switch Harness or connectors (half latch switch circuit is open or shorted) Automatic back door control module FAIL-SAFEInhibit automatic back door system auto open/close function DTC Confirmation Procedure PERFORM DTC CONFIRMATION PROCEDURE CONSULT Ignition switch ON...

    Nissan Murano (Z52) 2015-2024 Service Manual: Roof :: Preparation. Preparation


    Special Service Tool The actual shape of the tools may differ from those illustrated here. Tool number (TechMate No.) Tool name   Description   — (J-39570) Chassis Ear Locating the noise   — (J-50397) Squeak and Rattle Kit Repairing the cause of noise   — (J-46534) Trim Tool Set Removing trim components Commercial Service Tools (TechMate No...

    Categories

    Unfastening the seat belts. Checking seat belt operation

    Unfastening the seat belts

    Nissan Murano. Unfastening the seat belts. Checking seat belt operation

    To unfasten the seat belt, press the button on the buckle Nissan Murano. Unfastening the seat belts. Checking seat belt operation. The seat belt automatically retracts.

    read more

     
    Copyright © 2026 www.nimurano.com