Nissan Murano: Transmission & Driveline / Driveline :: Rear Propeller Shaft: C-Cvj-C

Service Data and Specifications (sds). Service Data and Specifications (sds)

General Specifications Applied model Axle AWD Engine VQ35DE Transaxle CVT Transfer model TY21C Gear ratio 0.404 Number of teeth Ring gear 42 Drive pinion 17 Oil capacity Refer to Fluids and Lubricants...

Precaution. Precautions

Precaution for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT BELT PRE-TENSIONER" The Supplemental Restraint System such as “AIR BAG” and “SEAT BELT PRE-TENSIONER”, used along with a front seat belt, helps to reduce the risk or severity of injury to the driver and front passenger for certain types of collisions...

Other information:

Nissan Murano (Z52) 2015-2024 Service Manual: P0966 Pressure Control Solenoid B

DTC Description DTC DETECTION LOGIC DTC CONSULT screen terms (Trouble diagnosis content) DTC detection condition P0966 PC SOLENOID B (Pressure Control Solenoid B Control Circuit Low) Diagnosis condition TCM power supply voltage: More than 11 V Signal — Threshold TCM judges that solenoid valve circuit is shorted to ground Diagnosis delay time Maintained for 1 second POSSIBLE CAUSE Harness or connector (Primary pressure solenoid valve circuit shorted to ground) Primary pressure solenoid valve FAIL-SAFE Selector shock is large Start is slow Acceleration is slow Lock-up is not performed DTC Confirmation Procedure PREPARATION BEFORE WORK If another "DTC CONFIRMATION PROCEDURE" occurs just before, turn ignition switch OFF and wait for at least 10 seconds, then perform the next test...

Nissan Murano (Z52) 2015-2024 Service Manual: Preparation. Preparation

Special Service Tools The actual shape of the tools may differ from those illustrated here. Tool number (TechMate No.) Tool name Description   — (1-20-2851-1) Radar Sensor Aiming kit* Adjusting distance and radar sensors * NOTE: Tools 1–20–2721–1–IF, 1–20–2722–1–IF and J-50808 have been superseded and are no longer available, but may still be used for distance sensor alignment...