Other information:
Removal and Installation
REMOVALRemove back door kicking plate. Refer to Removal and Installation.
Remove bolts and back door striker.INSTALLATIONInstallation is in the reverse order of removal.CAUTION:
Do not reuse back door striker bolts.
Tighten bolts to specification...
Diagnosis Procedure
CHECK BCM CONNECTORS
Ignition switch OFF.
Disconnect BCM connectors.
Check terminals for damage or loose connections.
Is the inspection result normal?
YES>>
GO TO 2.
NO>>
Repair or replace damaged connectors.
BCM POWER SUPPLY AND GROUND CIRCUITS
Check BCM power supply and ground circuits...