Nissan Murano: Diagnosis System (bcm) / Common Item

Nissan Murano (Z52) 2015-2024 Service Manual / Electrical & Power Control / Body Control System :: Bcm / System Description / Diagnosis System (bcm) / Common Item

CONSULT Function (BCM - COMMON ITEM)

APPLICATION ITEM

CONSULT performs the following functions via CAN communication with BCM:

Direct Diagnostic Mode Description
ECU Identification The BCM part number is displayed.
Self Diagnostic Result The BCM self diagnostic results are displayed.
Data Monitor The BCM input/output data is displayed in real time.
Active Test The BCM activates outputs to test components.
Work support The settings for BCM functions can be changed.
Configuration

  • The Nissan Murano vehicle specification can be read and saved.

  • The vehicle specification can be written when replacing BCM.
CAN Diag Support Mntr The result of transmit/receive diagnosis of CAN communication is displayed.

SYSTEM APPLICATION

BCM can perform the following functions:

System Sub System Direct Diagnostic Mode
ECU Identification Self Diagnostic Result Data Monitor Active Test Work support Configuration CAN Diag Support Mntr
Door lock DOOR LOCK × × × × ×
Rear window defogger REAR DEFOGGER × × × × ×
Warning chime BUZZER × × × ×
Interior room lamp timer INT LAMP × × × × ×
Exterior lamp HEAD LAMP × × × × ×
Wiper and washer WIPER × × × × ×
Turn signal and hazard warning lamps FLASHER × × × × ×
Air conditioner AIR CONDITIONER × × ×
Intelligent Key system INTELLIGENT KEY × × × × ×
Combination switch COMB SW × × ×
BCM BCM × ×   × × ×
Immobilizer IMMU × × × ×
Interior room lamp battery saver BATTERY SAVER × × × ×
Back door open TRUNK × × ×
Nissan Murano Vehicle security system THEFT ALM × × × × ×
RAP system RETAINED PWR × × ×
Signal buffer system SIGNAL BUFFER × × × ×
TPMS AIR PRESSURE MONITOR × × × ×

    Diagnosis System (bcm)

    ..

    Door Lock

    CONSULT Function (BCM - DOOR LOCK) ECU IDENTIFICATIONThe BCM part number is displayed.SELF DIAGNOSTIC RESULTRefer to DTC Index.DATA MONITOR Monitor Item [Unit] Description REQ SW-DR [On/Off] Indicates condition of door request switch LH...

    Other information:

    Nissan Murano (Z52) 2015-2024 Service Manual: U0101 Can Comm Circuit


    DTC Description DESCRIPTIONCAN (Controller Area Network) is a serial communication line for real time application. It is an on-Nissan Murano vehicle multiplex communication line with high data communication speed and excellent error detection ability...

    Nissan Murano (Z52) 2015-2024 Service Manual: Front Camera Unit


    Values on the Diagnosis Tool VALUE ON THE DIAGNOSIS TOOLNOTE: The following table includes information (items) inapplicable to this Nissan Murano vehicle. For information (items) applicable to this vehicle, refer to CONSULT display items. Monitor item Condition Value/Status CAMERA HIGH TEMP When the temperature around lane camera unit is adequate NORMAL When the temperate around the lane camera unit is high HIGH WIPER Ignition switch ON Wiper position is High Hi Wiper position is Low Lo Wiper position is OFF Off TURN SIGNAL Turn signal lamp LH and RH blinking LH&RH Turn signal lamp LH blinking LH Turn signal lamp RH blinking RH Turn signal lamps OFF Off Nissan Murano Vehicle SPEED While drive km/h DRIVER ASSIST SYSTEM SET NOTE: The item is displayed, but it is not used...

    Categories

    Autolight system

    Nissan Murano. Autolight system

    The autolight system allows the headlights to turn on and off automatically. The autolight system can:

    Turn on the headlights, front parking, tail, license plate and instrument panel lights automatically when it is dark. Turn off all the lights (except daylight running lights) when it is light. Keep all the lights on for a period of time after you place the ignition switch in the OFF position and all doors are closed.

    read more

     
    Copyright © 2026 www.nimurano.com