Nissan Murano: Diagnosis System (bcm) / Door Lock

Nissan Murano (Z52) 2015-2024 Service Manual / Electrical & Power Control / Body Control System :: Bcm / System Description / Diagnosis System (bcm) / Door Lock

CONSULT Function (BCM - DOOR LOCK)

ECU IDENTIFICATION

The BCM part number is displayed.

SELF DIAGNOSTIC RESULT

Refer to DTC Index.

DATA MONITOR

Monitor Item [Unit]	Description
REQ SW-DR [On/Off]	Indicates condition of door request switch LH.
REQ SW-AS [On/Off]	Indicates condition of door request switch RH.
REQ SW-BD/TR [On/Off]	Indicates condition of back door request switch.
DOOR SW-DR [On/Off]	Indicates condition of front door switch LH.
DOOR SW-AS [On/Off]	Indicates condition of front door switch RH.
DOOR SW-RR [On/Off]	Indicates condition of rear door switch RH.
DOOR SW-RL [On/Off]	Indicates condition of rear door switch LH.
DOOR SW-BK [On/Off]	Indicates condition of back door switch.
CDL LOCK SW [On/Off]	Indicates condition of lock signal from door lock and unlock switch.
CDL UNLOCK SW [On/Off]	Indicates condition of unlock signal from door lock and unlock switch.
KEY CYL LK-SW [On/Off]	Indicates condition of lock signal from door key cylinder switch.
KEY CYL UN-SW [On/Off]	Indicates condition of unlock signal from door key cylinder switch.
SHOCK SENSOR [Normal/On/ Off]	Indicates condition of circuit between BCM and air bag diagnosis unit.

ACTIVE TEST

Test Item	Description
DOOR LOCK	This test is able to check door lock operation [ALL LOCK/ALL UNLK].

WORK SUPPORT

Support Item	Setting	Description
DOOR LOCK-UNLOCK SET	On*	Automatic door locks function ON.
DOOR LOCK-UNLOCK SET	Off	Automatic door locks function OFF.
AUTO UNLOCK TYPE	MODE2	Driver door only unlocks automatically.
AUTO UNLOCK TYPE	MODE1*	All doors unlock automatically.
AUTO LOCK FUNCTION	MODE3	This mode is not used.
	MODE2	Doors lock automatically when shifted out of P (park).
	MODE1*	Doors lock automatically when Nissan Murano vehicle speed reaches 24 km/h (15 mph).
	Off	—
AUTO UNLOCK FUNCTION	MODE3	This mode is not used.
	MODE2	Doors unlock automatically when shifted into P (park).
	MODE1*	Doors unlock automatically when ignition is switched from ON to OFF.
	Off	—
SIGNATURE LIGHT SETTING	On*	Signature light setting ON.
SIGNATURE LIGHT SETTING	Off	Signature light setting OFF.

*: Initial setting

Common Item

CONSULT Function (BCM - COMMON ITEM) APPLICATION ITEMCONSULT performs the following functions via CAN communication with BCM: Direct Diagnostic Mode Description ECU Identification The BCM part number is displayed...

Rear Defogger

CONSULT Function (BCM - REAR DEFOGGER) ECU IDENTIFICATIONThe BCM part number is displayed.SELF DIAGNOSTIC RESULTRefer to DTC Index.DATA MONITOR Monitor Item [Unit] Description PUSH SW [On/Off] Indicates condition of push-button ignition switch...

Other information:

Nissan Murano (Z52) 2015-2024 Service Manual: P0447 Evap Canister Vent Control Valve

DTC Description DTC DETECTION LOGICAn improper voltage signal is sent to ECM through EVAP canister vent control valve. DTC CONSULT screen terms (Trouble diagnosis content) DTC detection condition P0447 VENT CONTROL VALVE (Evaporative emission system vent control circuit open) Diagnosis condition Start engine and let it idle Signal (terminal) Voltage signal transmitted from EVAP canister vent control valve to ECM Threshold An improper voltage signal is sent to ECM through EVAP canister vent control valve Diagnosis delay time — POSSIBLE CAUSE Harness or connectors (The valve circuit is open or shorted...

Nissan Murano (Z52) 2015-2024 Service Manual: P0197 Eot Sensor

DTC Description DTC DETECTION LOGIC An excessively low voltage from the sensor is sent to ECM. An excessively high voltage from the sensor is sent to ECM. DTC CONSULT screen terms (Trouble diagnosis content) DTC detection condition P0197 EOT SEN/CIRC (Engine oil temperature sensor circuit low) Diagnosis condition Start engine and let it idle Signal (terminal) Voltage signal transmitted from engine oil temperature sensor to ECM Threshold An excessively low voltage from the sensor is sent to ECM Diagnosis delay time — P0198 EOT SEN/CIRC (Engine oil temperature sensor circuit high) Diagnosis condition Start engine and let it idle Signal (terminal) Voltage signal transmitted from engine oil temperature sensor to ECM Threshold An excessively high voltage from the sensor is sent to ECM Diagnosis delay time — POSSIBLE CAUSEP0197 Harness or connectors (The sensor circuit is open or shorted...