Nissan Murano: Child restraints / Booster seats
For additional information on installing a
booster seat in your vehicle, follow the instructions
outlined in this section.
Rear row bench seat
Top tether strap
Anchor point
The child restraint top tether strap must be
used when installing the child restraint with
seat belts...
WARNING
If a booster seat and seat belt are not
used properly, the risk of a child being
injured or killed in a sudden stop or collision
greatly increases:
Make sure the shoulder portion of
the belt is away from the child’s
face and neck and the lap portion
of the belt does not cross the
stomach...
Other information:
Checking Damage
When completing body and frame repairs, the front body and underbody dimensions must be correct, because these dimensions directly affect wheel alignment and steering angles.The degree of damage should be determined by using a steel tape, tram tracking gauge and centering gauge or other measuring device...
Diagnosis Procedure
Engine does not start when ignition switch is pressed.SYMPTOM TABLE (BOTH INTELLIGENT KEYS HAVE THE SAME SYMPTOMS) Door lock operation (remote keyless entry) Door lock operation (request switch) or back door open operation (opener switch of back door panel) Engine started with push-button ignition switch operation (registered Intelligent Key is within the detection area of inside key antenna) Engine started with push-button ignition switch operation (registered Intelligent Key placed next to push-button ignition switch)
OK
OK
No start
No start
CONDITIONS OF VEHICLE (OPERATING CONDITIONS)“ENGINE START BY I-KEY” setting in “Work support” mode of “BCM(INTELLIGENT KEY)” is ON...