Nissan Murano: Door & Lock :: Symptom Diagnosis / Automatic Back Door Anti-Pinch Function Does Not Operate
CHECK POWER SUPPLY AND GROUND CIRCUIT
Check automatic back door control module power supply and ground circuit.
Refer to Diagnosis Procedure.
Is the inspection result normal?
YES>>GO TO 2.
NO>>Repair or replace the malfunctioning parts.
CHECK TOUCH SENSOR LH
Check touch sensor LH.
Refer to Component Function Check.
Is the inspection result normal?
YES>>GO TO 3.
NO>>Repair or replace the malfunctioning parts.
CHECK TOUCH SENSOR RH
Check touch sensor RH.
Refer to Component Function Check.
Is the inspection result normal?
YES>>GO TO 4.
NO>>Repair or replace the malfunctioning parts.
REPLACE AUTOMATIC BACK DOOR CONTROL MODULE
-
Replace automatic back door control module. Refer to Removal and Installation.
-
Confirm the operation after replacement.
Is the result normal?
YES>>Inspection End.
NO>>Check intermittent incident. Refer to Intermittent Incident.
Automatic Back Door Functions Do Not Cancel
Diagnosis Procedure
REPLACE AUTOMATIC BACK DOOR CONTROL MODULE
Replace automatic back door control module. Refer to Removal and Installation.
Confirm the operation after replacement...
Motion Activated Back Door Does Not Operate Properly
Diagnosis Procedure
Automatic back door open/close function does not operate properly when using motion activated back door sensor.CHECK BATTERY
Check the vehicle battery condition...
Other information:
Nissan Murano (Z52) 2015-2024 Service Manual: P0462 Fuel Level Sensor
DTC Description DTC DETECTION LOGIC An excessively low voltage from the sensor is sent to ECM. An excessively high voltage from the sensor is sent to ECM. DTC CONSULT screen terms (Trouble diagnosis content) DTC detection condition P0462 FUEL LEVL SEN/CIRC (Fuel level sensor “A” circuit low) Diagnosis condition Ignition switch ON Signal (terminal) Voltage signal transmitted from fuel level sensor to ECM Threshold An excessively low voltage from the sensor is sent to ECM Diagnosis delay time — P0463 FUEL LEVL SEN/CIRC (Fuel level sensor “A” circuit high) Diagnosis condition Ignition switch ON Signal (terminal) Voltage signal transmitted from fuel level sensor to ECM Threshold An excessively high voltage from the sensor is sent to ECM Diagnosis delay time — POSSIBLE CAUSEDTC P0462 Harness or connectors (The CAN communication line is open or shorted) Harness or connectors (The sensor circuit is open or shorted) Combination meter Fuel level sensor DTC P0463 Harness or connectors (The CAN communication line is open or shorted) Harness or connectors (The sensor circuit is open or shorted) Combination meter Fuel level sensor FAIL-SAFENot applicable DTC Confirmation Procedure CHECK DTC PRIORITY If DTC P0462 or P0463 is displayed with DTC UXXXX or P0607, first perform the confirmation procedure for DTC UXXXX or P0607...
Nissan Murano (Z52) 2015-2024 Service Manual: B259a Room Lamp Fuse Blown
DTC Description DTC DETECTION LOGIC DTC No. CONSULT screen terms (Trouble diagnosis content) DTC Detection Condition B259A ROOM LAMP FUSE BLOWN (Room lamp fuse blown) Diagnosis condition When ignition switch ON. Signal (terminal) BCM power circuit (terminal 131 and ground) Threshold Approx...
Categories
- Manuals Home
- Nissan Murano Owners Manual
- Nissan Murano Service Manual
- GAS STATION INFORMATION
- Power Steering Fluid (PSF)
- Rear bench seat adjustment
- New on site
- Most important about car
Autolight system
The autolight system allows the headlights to turn on and off automatically. The autolight system can:
Turn on the headlights, front parking, tail, license plate and instrument panel lights automatically when it is dark. Turn off all the lights (except daylight running lights) when it is light. Keep all the lights on for a period of time after you place the ignition switch in the OFF position and all doors are closed.