Nissan Murano: Power Supply and Ground Circuit / Air Mix Door Motor Rh

Nissan Murano (Z52) 2015-2024 Service Manual / Ventilation, Heater & Air Conditioner / Heater & Air Conditioning Control System :: Dtc/circuit Diagnosis / Power Supply and Ground Circuit / Air Mix Door Motor Rh

Diagnosis Procedure

CHECK AIR MIX DOOR MOTOR RH POWER SUPPLY

  1. Ignition switch ON.

  2. Check voltage between air mix door motor RH harness connector and ground.

    + −

    Voltage

    (Approx.)
    Air mix door motor RH
    Connector Terminal
    M156 1 Ground Battery voltage

Is the inspection result normal?

YES>>

GO TO 2.

NO>>

GO TO 4.

CHECK AIR MIX DOOR MOTOR RH GROUND CIRCUIT

  1. Ignition switch OFF.

  2. Disconnect air mix door motor RH connector.

  3. Check continuity between air mix door motor RH harness connector and ground.

    Air mix door motor RH — Continuity
    Connector Terminal
    M156 2 Ground Yes

Is the inspection result normal?

YES>>

GO TO 3.

NO>>

Repair harness or connector.

CHECK INSTALLATION OF AIR MIX DOOR MOTOR RH

Check air mix door motor RH is properly installed. Refer to Exploded View.

Is the inspection result normal?

YES>>

Replace air mix door motor RH. Refer to Removal and Installation - (RH).

NO>>

Repair or replace malfunctioning part.

CHECK AIR MIX DOOR MOTOR RH POWER SUPPLY CIRCUIT

  1. Ignition switch OFF.

  2. Disconnect air mix door motor RH connector and A/C auto amp. connector.

  3. Check continuity between air mix door motor RH harness connector and A/C auto amp. harness connector.

    Air mix door motor RH A/C auto amp. Continuity
    Connector Terminal Connector Terminal
    M156 1 M50 17 Yes

Is the inspection result normal?

YES>>

Replace A/C auto amp. Refer to Removal and Installation.

NO>>

Repair harness or connector.

    Air Mix Door Motor Lh

    Diagnosis Procedure CHECK AIR MIX DOOR MOTOR LH POWER SUPPLY Ignition switch ON. Check voltage between air mix door motor LH harness connector and ground...

    Mode Door Motor

    Diagnosis Procedure CHECK MODE DOOR MOTOR POWER SUPPLY Ignition switch ON. Check voltage between mode door motor harness connector and ground. + − Voltage (Approx...

    Other information:

    Nissan Murano (Z52) 2015-2024 Service Manual: B2416 Touch Sen R Open


    DTC Description DTC DETECTION LOGIC DTC No. CONSULT screen items (Trouble diagnosis content) DTC detecting condition B2416–1B TOUCH SEN R OPEN (Touch sensor right open) Diagnosis condition All times Signal (terminal) Touch sensor RH signal (automatic back door control module connector terminal: 4) Threshold When one of the following conditions is satisfied Touch sensor RH circuit is open Disconnect touch sensor RH connector Diagnosis delay time – B2416–1E TOUCH SEN R OPEN (Touch sensor right open) Diagnosis condition All times Signal (terminal) Touch sensor RH signal (automatic back door control module connector terminal: 4) Threshold When one of the following conditions is satisfied Touch sensor RH circuit is open Disconnect touch sensor RH connector Diagnosis delay time – POSSIBLE CAUSE Improper installation of touch sensor Touch sensor RH Harness or connectors (touch sensor circuit is open) Automatic back door control module FAIL-SAFEInhibit automatic back door system auto open/close function DTC Confirmation Procedure PERFORM DTC CONFIRMATION PROCEDURE CONSULT Ignition switch ON...

    Nissan Murano (Z52) 2015-2024 Owners Manual: Wheel balance


    Unbalanced wheels may affect vehicle handling and tire life. Even with regular use, wheels can get out of balance. Therefore, they should be balanced as required. Wheel balance service should be performed with the wheels off the vehicle. Spin balancing the wheels on the vehicle could lead to mechanical damage...

    Categories

    Seatback pockets

    Nissan Murano. Seatback pockets

    Theremaybe one or two seatback pockets located on the back of the driver and passenger seats. The pockets can be used to store maps.

    WARNING

    read more

     
    Copyright © 2026 www.nimurano.com