Nissan Murano: Power Supply and Ground Circuit / Mode Door Motor
CHECK MODE DOOR MOTOR POWER SUPPLY
-
Ignition switch ON.
-
Check voltage between mode door motor harness connector and ground.
+ − Voltage
(Approx.)Mode door motor Connector Terminal M154 1 Ground Battery voltage
Is the inspection result normal?
YES>>GO TO 2.
NO>>GO TO 4.
CHECK MODE DOOR MOTOR GROUND CIRCUIT
-
Ignition switch OFF.
-
Disconnect mode door motor connector.
-
Check continuity between mode door motor harness connector and ground.
Mode door motor — Continuity Connector Terminal M154 2 Ground Yes
Is the inspection result normal?
YES>>GO TO 3.
NO>>Repair harness or connector.
CHECK INSTALLATION OF MODE DOOR MOTOR CONTROL LINKAGE
Check mode door motor control linkage is properly installed. Refer to Exploded View.
Is the inspection result normal?
YES>>Replace mode door motor. Refer to Removal and Installation.
NO>>Repair or replace malfunctioning part.
CHECK MODE DOOR MOTOR POWER SUPPLY CIRCUIT
-
Ignition switch OFF.
-
Disconnect mode door motor connector and A/C auto amp. connector.
-
Check continuity between mode door motor harness connector and A/C auto amp. harness connector.
Mode door motor A/C auto amp. Continuity Connector Terminal Connector Terminal M154 1 M50 17 Yes
Is the inspection result normal?
YES>>Replace A/C auto amp. Refer to Removal and Installation.
NO>>Repair harness or connector.
Air Mix Door Motor Rh
Diagnosis Procedure
CHECK AIR MIX DOOR MOTOR RH POWER SUPPLY
Ignition switch ON.
Check voltage between air mix door motor RH harness connector and ground...
Intake Door Motor
Diagnosis Procedure
CHECK INTAKE MODE DOOR MOTOR POWER SUPPLY
Ignition switch ON.
Check voltage between intake mode door motor harness connector and ground...
Other information:
Nissan Murano (Z52) 2015-2024 Service Manual: Symptom Diagnosis. Cvt Control System
Symptom Table The diagnosis item number indicates the order of check. Start checking in the order from 1. Perform diagnoses of symptom table 1 before symptom table 2. Symptom Table 1 Symptom Engine system CAN communication line Transmission range switch (P0705, P0706) Input speed sensor (P0715, P0716, P0717) Primary speed sensor (P0791, P0792, P0793) Secondary speed sensor (P2765, P2766, P2767) CVT fluid temperature sensor (P0711, P0712, P0713) Primary pressure sensor (P084C, P084D) Secondary pressure sensor (P0841, P0847, P0848) Torque converter clutch solenoid valve (P0740, P0743, P0744) Manual mode switch Stall test CVT position Power supply Control valve CVT fluid level and state Ignition switch and starter Work Flow DTC Index Work Procedure Inspection and Adjustment Diagnosis Procedure Removal and Installation (front wheel drive) or Removal and Installation (all wheel drive) Inspection Wiring Diagram, Wiring Diagram - IGNITION POWER SUPPLY - Shift Shock Large shock (N→ D position) 1 4 8 3 6 2 9 5 Large shock (N→ R position) 1 4 8 3 6 2 9 5 Shock is too large for lock-up...
Nissan Murano (Z52) 2015-2024 Service Manual: Front Fog Lamp System
System Description SYSTEM DIAGRAMSignal transmission function list Signal name Input Output Description Combination switch signal Combination switch (lighting and turn signal switch) BCM Transmits the combination switch signal to the BCM. Front fog lights request signal BCM IPDM E/R (CAN) Combination meter (CAN) Transmits the front fog lights request signal via CAN communication...
Categories
- Manuals Home
- Nissan Murano Owners Manual
- Nissan Murano Service Manual
- Memory storage function (key-link)
- Shift lock release
- How to enable/disable the LDW system
- New on site
- Most important about car
Unfastening the seat belts. Checking seat belt operation
Unfastening the seat belts
To unfasten the seat belt, press the button
on the buckle 
. The seat belt
automatically
retracts.
