Nissan Murano: Symptom Diagnosis / Aeb Warning Lamp Is Blinking
The AEB warning lamp is blinking. Refer to Diagnosis Procedure.
NOTE:
When any of the following conditions, the AEB warning lamp blinks:
-
The distance sensor area of the front of the Nissan Murano vehicle is covered with dirt or is obstructed
-
The interior temperature of the vehicle is extremely high
-
The windshield is dirty, frosted, fogged up, or damaged in front of the lane camera unit
-
The lane camera unit or the lane camera unit bracket is not mounted properly
CHECK THE WINDSHIELD
Check if the windshield is dirty, frosted, fogged up, or damaged in front of the lane camera unit.
Is the inspection result normal?
YES>>GO TO 2.
NO>>Clear, clean, or repair the windshield as needed. Refer to Removal and Installation.
CHECK THE LANE CAMERA UNIT AND LANE CAMERA UNIT BRACKET INSTALL CONDITION
Check if the lane camera unit and the lane camera unit bracket are mounted properly.
Is the inspection result normal?
YES>>INSPECTION END
NO>>Correct improper mounting.
System Settings Cannot Be Turned On/off on the Integral Switch
Symptom Table
CAUTION:
Perform the “Self Diagnostic Result” with CONSULT before the symptom diagnosis. Perform the trouble diagnosis if any DTC is detected...
Steering
..
Other information:
Nissan Murano (Z52) 2015-2024 Service Manual: B2e33 Ecall Button
DTC Description DTC DETECTION LOGIC DTC No. CONSULT screen terms (Trouble diagnosis content) DTC detection condition B2E33 ECALL BUTTON (Ecall button) Diagnosis condition When ignition switch is ON. Signal (terminal) SOS switch LED signal (terminal 5) Threshold — Diagnosis delay time 1 second or more POSSIBLE CAUSE SOS switch LED signal circuit SOS switch TCU FAIL-SAFE Telematics system does not function (Only SOS call does not operate) SOS switch LED indicator is turned OFF DTC Confirmation Procedure PERFORM DTC CONFIRMATION PROCEDURE CONSULT Ignition switch ON...
Nissan Murano (Z52) 2015-2024 Service Manual: Power Consumption Control System
System Description SYSTEM DIAGRAMINPUT SIGNAL AND OUTPUT SIGNALMajor signal transmission between each unit via communication lines is shown in the following table: Component parts Signal description IPDM E/R Each unit transmits the sleep-ready signal (ready) to BCM when all of the CAN sleep conditions are fulfilled...
Categories
- Manuals Home
- Nissan Murano Owners Manual
- Nissan Murano Service Manual
- Jacking up vehicle and removing the damaged tire
- System malfunction
- Tire rotation
- New on site
- Most important about car
Autolight system
The autolight system allows the headlights to turn on and off automatically. The autolight system can:
Turn on the headlights, front parking, tail, license plate and instrument panel lights automatically when it is dark. Turn off all the lights (except daylight running lights) when it is light. Keep all the lights on for a period of time after you place the ignition switch in the OFF position and all doors are closed.