Nissan Murano: Ecu Diagnosis Information / Adas Control Unit 2

Distance Sensor (icc Sensor)

L..

Side Radar Lh

Values on the Diagnosis Tool CONSULT MONITOR ITEM Monitor Item Condition Value/Status BSW/CTA WARN STATUS BSW system is normal On BSW system is malfunctioning Off CTA SYSTEM ON CTA system is ON On CTA system is OFF Off BSW STATUS BSW system is ON On BSW system is OFF Off VHCL SPD SE Indicates current Nissan Murano vehicle speed km/h TURN SIGNAL Left/right turn signal is ON On Left/right turn signal is OFF Off SHIFT POSITION Shows the position of the transmission range switch P/R/N/D LUMINANCE(LEFT) Shows radar left luminance level Hi/Lo LUMINANCE (RIGHT) Shows radar right luminance level Hi/Lo Reference Value TERMINAL LAYOUTPHYSICAL VALUES Terminal No...

Other information:

Nissan Murano (Z52) 2015-2024 Service Manual: P1078 Evt Control Position Sensor

DTC Description DTC DETECTION LOGICAn excessively high or low voltage from the sensor is sent to ECM. DTC CONSULT screen terms (Trouble diagnosis content) DTC detection condition P1078 EXH TIM SEN/CIRC-B1 [Exhaust valve timing (EVT) control position sensor (bank 1) circuit] Diagnosis condition Start engine and let it idle Signal (terminal) Voltage signal transmitted from EVT control position sensor to ECM Threshold An excessively high or low voltage from the sensor is sent to ECM Diagnosis delay time — P1084 EXH TIM SEN/CIRC-B2 [Exhaust valve timing (EVT) control position sensor (bank 2) circuit] Diagnosis condition Start engine and let it idle Signal (terminal) Voltage signal transmitted from EVT control position sensor to ECM Threshold An excessively high or low voltage from the sensor is sent to ECM Diagnosis delay time — POSSIBLE CAUSEDTC P1078 Harness or connectors [EVT control position sensor (bank 1) circuit is open or shorted...

Nissan Murano (Z52) 2015-2024 Service Manual: P0778 Pressure Control Solenoid B

DTC Description DTC DETECTION LOGIC DTC CONSULT screen terms (Trouble diagnosis content) DTC detection condition P0778 PC SOLENOID B (Pressure Control Solenoid “B” Electrical) Diagnosis condition TCM power supply voltage: More than 11 V Signal — Threshold TCM judges that solenoid valve circuit is shorted to ground Diagnosis delay time Maintained for 1 second POSSIBLE CAUSE Harness or connector (Secondary pressure solenoid valve circuit is shorted to ground) Secondary pressure solenoid valve FAIL-SAFE Selector shock is large Start is slow Acceleration is slow Lock-up is not performed DTC Confirmation Procedure CAUTION: Always drive vehicle at a safe speed...