Nissan Murano: Ecu Diagnosis Information / Distance Sensor (icc Sensor)

Nissan Murano (Z52) 2015-2024 Service Manual / Cruise Control & Driver Assistance / Driver Assistance System :: Driver Assistance System / Ecu Diagnosis Information / Distance Sensor (icc Sensor)

List of ECU Reference

ECU	Reference
Distance sensor (ICC sensor)	Values on the Diagnosis Tool
	Reference Value
	Fail-safe [Distance sensor (ICC sensor)]
	DTC Inspection Priority Chart
	DTC Index

Other information:

Nissan Murano (Z52) 2015-2024 Service Manual: Rear Stabilizer

Exploded View 1. Rear suspension arm 2. Stabilizer connecting rod 3. Stabilizer 4. Stabilizer bushing 5. Stabilizer clamp Front Removal and Installation REMOVALRemove the rear under covers (LH/RH). Refer to Removal and Installation...

Nissan Murano (Z52) 2015-2024 Service Manual: P2127 App Sensor

DTC Description DTC DETECTION LOGIC An excessively low voltage from the APP sensor 2 is sent to ECM. An excessively high voltage from the APP sensor 2 is sent to ECM. DTC CONSULT screen terms (Trouble diagnosis content) DTC detection condition P2127 APP SEN 2/CIRC (Throttle/Pedal position sensor/switch “E” circuit low) Diagnosis condition Start engine and let it idle Signal (terminal) Voltage signal transmitted from APP sensor 2 to ECM Threshold An excessively low voltage is sent to ECM Diagnosis delay time — P2128 APP SEN 2/CIRC (Throttle/Pedal position sensor/switch “E” circuit high) Diagnosis condition Start engine and let it idle Signal (terminal) Voltage signal transmitted from APP sensor 2 to ECM Threshold An excessively high voltage is sent to ECM Diagnosis delay time — POSSIBLE CAUSEDTC P2127 Harness or connectors (APP sensor 2 circuit is open or shorted...

Categories

Autolight system

Nissan Murano. Autolight system

The autolight system allows the headlights to turn on and off automatically. The autolight system can:

Turn on the headlights, front parking, tail, license plate and instrument panel lights automatically when it is dark. Turn off all the lights (except daylight running lights) when it is light. Keep all the lights on for a period of time after you place the ignition switch in the OFF position and all doors are closed.