Nissan Murano: Removal and Installation / Warning Buzzer
Removal and Installation
REMOVAL
Remove the glove box assembly and housing. Refer to Removal and Installation.
Disconnect harness connector (B) from the warning buzzer.

Disconnect the harness connector from the remote keyless entry receiver.
Remove screw (A) from the bracket.
Remove screws (A) from warning buzzer and remove warning buzzer.

INSTALLATION
Installation is in the reverse order of removal.
Exploded View
1.
Door mirror corner finisher
2.
Blind spot warning indicator
Clip
Removal and Installation
REMOVALRemove the front door finisher...
Exploded View
1.
Lane camera bracket
2.
Lane camera unit
3.
Inside mirror
4.
Inside mirror finisher
A.
Screw
Metal clip
Pawl
Removal and Installation
REMOVALRelease pawls and metal clips using a suitable tool and remove the inside mirror finisher...
Other information:
Component Function Check
CHECK FUNCTION
Check that system receiver (garage door opener, etc.) operates with original hand-held transmitter.
Is the inspection result normal?
YES>>
GO TO 2.
NO>>
Receiver or hand-held transmitter is malfunctioning...
Removal and Installation
REMOVALRemove front kicking plate. Refer to Removal and Installation - Front Kicking Plate.
Release metal clips using a suitable tool (A) as shown and remove dash side finisher (1).
: Metal clip
: FrontINSTALLATIONInstallation is in the reverse order of removal...
Categories

Your vehicle has two types of security systems:
Vehicle security system
NISSAN Vehicle Immobilizer System
The vehicle security system provides visual
and audible alarm signals if someone
opens the doors, liftgate or the hood when
the system is armed. It is not, however, a
motion detection type system that activates
when a vehicle is moved or when a
vibration occurs.
read more