Nissan Murano: Towing your vehicle / Towing recommended by NISSAN
NISSAN recommends towing your vehicle
based upon the type of drivetrain. For additional
information, refer to the diagrams in
this section to ensure that your vehicle is
properly towed.
When towing your vehicle, all jurisdictional
and local regulations for towing must be
followed. Incorrect towing equipment
could damage your vehicle...
NISSAN recommends that towing dollies
be used when towing your vehicle or place
the vehicle on a flatbed truck as illustrated.
CAUTION
Never tow All-Wheel Drive (AWD) models
equipped with a Continuously Variable
Transmission (CVT) with any of the
wheels on the ground as thismaycause
serious and expensive damage to the
transfer case and transmission...
Other information:
Inspection
PRELIMINARY INSPECTIONWARNING:
Always adjust wheel alignment with vehicle on flat surface.
NOTE:
If the wheel alignment is out of specification, inspect and replace any damaged or worn suspension parts before making any adjustments.
Check the following:
Check and adjust the wheel alignment with the vehicle under unladen conditions...
DTC Description
DTC DETECTION LOGIC DTC No. CONSULT screen terms (Trouble diagnosis content) DTC Detection Condition
B260F
ENG STATE SIG LOST
(Engine state signal lost)
Diagnosis condition
When ignition switch is ON.
Signal (terminal)
—
Threshold
BCM has not yet received the engine status signal from ECM when ignition switch is in the ON position...