Nissan Murano: Door & Lock :: System Description / System (integrated Homelink Transceiver)

System (automatic Back Door System)

System Description INPUT SIGNAL AND OUTPUT SIGNAL Signal name Input Output Description Automatic back door switch signal Automatic back door switch Automatic back door control module Inputs automatic back door switch signal and transmits it via CAN communication...

Diagnosis System (automatic Back Door Control Module)

CONSULT Function (AUTO BACK DOOR) APPLICATION ITEMSCONSULT performs the following functions via CAN communication with automatic back door control module: Diagnosis mode Function Description Self diagnostic result Displays the diagnosis results judged by automatic back door control module...

Other information:

Nissan Murano (Z52) 2015-2024 Service Manual: Door Mirror Motor

Component Function Check ACTIVE TEST CONSULT Select “MIRROR MOTOR RH” and “MIRROR MOTOR LH” in “Active Test” mode of “AUTO DRIVE POS.”. Check that the function operates normally. Test item Description MIRROR MOTOR LH UP Door mirror LH Upward DWN Downward L Leftward R Rightward Off Stop MIRROR MOTOR RH UP Door mirror RH Upward DWN Downward L Leftward R Rightward Off Stop Is the inspection result normal? YES>> Door mirror motor function is OK...

Nissan Murano (Z52) 2015-2024 Service Manual: P2138 App Sensor

DTC Description DTC DETECTION LOGICRationally incorrect voltage is sent to ECM compared with the signals from APP sensor 1 and APP sensor 2. DTC CONSULT screen terms (Trouble diagnosis content) DTC detection condition P2138 APP SENSOR (Throttle/Pedal position sensor/switch “D” / “E” voltage correlation) Diagnosis condition Start engine and let it idle Signal (terminal) APP sensor 1 signal and APP sensor 2 signal Threshold Rationally incorrect voltage is sent to ECM compared with the signals from APP sensor 1 and APP sensor 2 Diagnosis delay time — POSSIBLE CAUSE Harness or connector (APP sensor 1 or 2 circuit is open or shorted...