Other information:
DTC Description
DTC DETECTION LOGIC DTC No. CONSULT screen terms (Trouble diagnosis content) DTC Detection Condition
B260A
IGNITION RELAY
(Ignition relay)
Diagnosis condition
When ignition switch ON.
Signal (terminal)
—
Threshold
—
Diagnosis delay time
2 seconds or more
POSSIBLE CAUSE
Harness or connectors
BCM
IPDM E/R
FAIL SAFE—
DTC Confirmation Procedure
PERFORM DTC CONFIRMATION PROCEDURE
CONSULT
Ignition switch ON under the following conditions and wait for at least 2 seconds:
CVT selector lever is in the P (park) or N (neutral) position...
DTC Description
DTC DETECTION LOGIC DTC
CONSULT screen terms
(Trouble diagnosis content)
DTC detection condition
P0706
T/M RANGE SENSOR A
(Transmission Range Sensor A Circuit Range/Performance)
Diagnosis condition
TCM power supply voltage: More than 11 V
Signal
Transmission range switch signal
Threshold
All range signals stay OFF
Diagnosis delay time
Maintained for 30 seconds
POSSIBLE CAUSE
Harness or connector (Open circuit between ignition switch and transmission range switch/open circuit between transmission range switch and TCM)
Transmission range switch
Control cable
Harness or connector (CAN communication line is error)FAIL-SAFE
Shift position indicator on combination meter is not displayed
Selector shock is large
Start is slow
Acceleration is slow
Lock-up is not performed
DTC Confirmation Procedure
PREPARATION BEFORE WORK
If another "DTC CONFIRMATION PROCEDURE" occurs just before, turn ignition switch OFF and wait for at least 10 seconds, then perform the next test...