Other information:
DTC Description
DTC DETECTION LOGIC DTC No.
CONSULT screen terms
(Trouble diagnosis content) DTC detection condition
U1302
CAMERA POWER VOLT
(Camera power voltage)
Diagnosis condition
When ignition switch is ON
Signal (terminal)
Camera power supply circuits
Threshold
Camera power supply voltage is 5...
Description
The following figure shows the areas which are sealed at the factory. Sealant which has been applied to these areas should be smooth and free from cuts or gaps. Care should be taken not to apply an excess amount of sealant and not to allow other unaffected parts to come into contact with the sealant...