Cross-Sectional View
Converter housing
Oil pump
Planetary gear
Control valve
Oil pan
Chain belt
Planetary pulley
Secondary pulley
Side cover
Transaxle case
Differential case
Final gear
Reduction gear
Idler gear
Output gear
Drive sprocket
Torque converter
Driven sprocket
Oil pump chain
FWD models
AWD models
Transaxle Mechanism
TORQUE CONVERTER (WITH LOCK-UP FUNCTION)In the same way as a conventional A/T, the torque converter is a system that increases the engine torque and transmits the torque to the transaxle...
Other information:
DTC Description
DTC DETECTION LOGIC
A high voltage from the sensor is sent to ECM under light load driving condition.
A low voltage from the sensor is sent to ECM under heavy load driving condition.
DTC
CONSULT screen terms
(Trouble diagnosis content)
DTC detection condition
P0101
MAF SEN/CIRCUIT-B1
(Mass or volume air flow “A” circuit range/performance)
1
Diagnosis condition
—
Signal (terminal)
Voltage signal transmitted from MAF sensor to ECM
Threshold
A high voltage from the sensor is sent to ECM under light load driving condition
Diagnosis delay time
—
2
Diagnosis condition
—
Signal (terminal)
Voltage signal transmitted from MAF sensor to ECM
Threshold
A low voltage from the sensor is sent to ECM under heavy load driving condition
Diagnosis delay time
—
POSSIBLE CAUSE
Harness and connectors (The sensor circuit is open or shorted...
Removal and Installation
REMOVALRemove rear door assembly. Refer to Removal and Installation.
Remove center pillar lower finisher (rear door lower hinge only). Refer to Removal and Installation.
Remove rear door hinge bolts and nuts and rear door hinge...