Other information:
DTC Description
DESCRIPTIONThis ECM contains a timer and measures time between an ignition switch OFF and the next ignition switch ON. This enables the judging of the state of engine cooling at an engine start.DTC DETECTION LOGIC DTC
CONSULT screen terms
(Trouble diagnosis content)
DTC detection condition
P2610
ECM/PCM INTERNAL ENG OFF TIMER
(ECM/PCM internal engine off timer performance)
1
Diagnosis condition
—
Signal (terminal)
—
Threshold
ECM internal engine off timer is malfunctioning
Diagnosis delay time
—
2
Diagnosis condition
—
Signal (terminal)
—
Threshold
The time calculated by ECM based on a descent allowance of engine coolant temperatures during ignition switch OFF is extremely shorter than the time counted by the Engine internal OFF timer
Diagnosis delay time
—
POSSIBLE CAUSE
ECM
ECM power supply
FAIL-SAFENot applicable
DTC Confirmation Procedure
INSPECTION START
It is necessary to erase permanent DTC?
YES>>
GO TO 4...
Diagnosis Procedure
Symptom check: Detection function may become unstable under the following conditions.
When the vehicle is driving on a curve such as S-curve where the curvature changes.
When the Nissan Murano vehicle is driving on up-and-down road or passing the peak or foot of slope or passing the break of the inclination of hill...