Nissan Murano: Ducts and Grilles / Side Defroster Grille
Removal and Installation
REMOVAL
Remove the side defroster duct. Refer to Removal and Installation.
Remove the side defroster grille screws (A).

Remove the side defroster grille.
INSTALLATION
Installation is in the reverse order of removal.
Removal and Installation
REMOVALSide ventilator grille (LH)Release the pawls using a suitable tool and remove side ventilator grille (LH) (1).
: PawlSide ventilator grille (RH)Release the pawls using a suitable tool and remove side ventilator grille (RH) (1)...
Other information:
General Specification
GENERAL SPECIFICATIONS Cylinder arrangement
V-6
Displacement cm3 (cu in)
3,498 (213.45)
Bore and stroke mm (in)
96 x 81 (3.780 x 3.189)
Valve arrangement
DOHC
Firing order
1-2-3-4-5-6
Number of piston rings
Compression
2
Oil
1
Number of main bearings
4
Compression ratio
10...
DTC Description
DTC DETECTION LOGIC DTC No.
CONSULT screen items
(Trouble diagnosis content) DTC detecting condition
B242F–12
ABD BUZZER
(Automatic back door warning buzzer)
Diagnosis condition
All times
Signal (terminal)
Automatic back door warning buzzer signal (automatic back door control module connector terminal: 2)
Threshold
Automatic back door control module detects a malfunction of automatic back door warning buzzer circuit
Diagnosis delay time
–
POSSIBLE CAUSE
Harness or connectors (automatic back door warning buzzer circuit is open or shorted)
Automatic back door control module
FAIL-SAFE–
DTC Confirmation Procedure
PERFORM DTC CONFIRMATION PROCEDURE
CONSULT
Ignition switch ON...