Nissan Murano: Ventilation System :: Removal and Installation / Blower Unit

Side Defroster Grille

Removal and Installation REMOVALRemove the side defroster duct. Refer to Removal and Installation. Remove the side defroster grille screws (A). Remove the side defroster grille...

Blower Unit

Exploded View 1. Blower unit 2. Heating and cooling unit Front Removal and Installation REMOVALRemove the heating and cooling unit assembly...

Other information:

Nissan Murano (Z52) 2015-2024 Service Manual: Transfer Case

Exploded View Oil seal Transfer cover Filler plug Gasket Drain plug Oil seal O-ring Ring gear bearing adjusting shim (transfer cover side) Ring gear bearing (transfer cover side) Drive shaft oil seal Ring gear shaft Ring gear bearing (transfer case side) Ring gear bearing adjusting shim (transfer case side) Ring gear Baffle plate Transfer case Plug O-ring Oil seal Dowel pin Drive pinion Drive pinion adjusting shim O-ring Pinion bearing assembly Oil seal Dust cover Companion flange Pinion lock nut         Oil seal lip Comply with the assembly procedure when tightening...

Nissan Murano (Z52) 2015-2024 Service Manual: Door Motor Communication Circuit

Diagnosis Procedure NOTE: If all of door motor DTCs are detected, check this circuit. CHECK EACH DOOR MOTOR COMMUNICATION SIGNAL Ignition switch ON. Check output waveform between A/C auto amp. harness connector and ground with the oscilloscope. + − Output waveform A/C auto amp...