Other information:
Exploded View
1.
Accelerator pedal assembly
Front
Removal and Installation
REMOVALRemove accelerator pedal assembly nuts.
Disconnect harness connector from the accelerator pedal assembly.
Remove the accelerator pedal assembly from Nissan Murano vehicle...
DTC Description
DTC DETECTION LOGIC
An excessively low voltage from the TP sensor 1 is sent to ECM.
An excessively high voltage from the TP sensor 1 is sent to ECM.
DTC
CONSULT screen terms
(Trouble diagnosis content)
DTC detection condition
P0222
TP SEN 1/CIRC-B1
(Throttle/Pedal position sensor/switch “B” circuit low)
Diagnosis condition
Start engine and let it idle
Signal (terminal)
Voltage signal transmitted from TP sensor 1 to ECM
Threshold
An excessively low voltage from the TP sensor 1 is sent to ECM
Diagnosis delay time
—
P0223
TP SEN 1/CIRC-B1
(Throttle/Pedal position sensor/switch “B” circuit high)
Diagnosis condition
Start engine and let it idle
Signal (terminal)
Voltage signal transmitted from TP sensor 1 to ECM
Threshold
An excessively high voltage from the TP sensor 1 is sent to ECM
Diagnosis delay time
—
POSSIBLE CAUSEP0222
Harness or connectors (TP sensor 1 circuit is open or shorted...