Nissan Murano: Cruise Control System :: Icc / Removal and Installation

The System Does Not Detect the Vehicle Ahead at All

Diagnosis Procedure When ICC system is active, the ICC system does not perform any control even though there is a vehicle ahead.CHECK ICC SYSTEM DISPLAY ON INFORMATION DISPLAY Start the self-diagnosis mode of combination meter...

Distance Sensor

Exploded View 1. Front bumper reinforcement 2. Distance sensor 3. Distance sensor bracket A. Refer to Installation. B. Refer to Installation ...

Other information:

Nissan Murano (Z52) 2015-2024 Service Manual: B2401 Ign Open

DTC Description DTC DETECTION LOGIC DTC No. CONSULT screen items (Trouble diagnosis content) DTC detecting condition B2401–86 IGN OPEN (Ignition open) Diagnosis condition All times Signal (terminal) Ignition switch ON signal (CAN communication) Threshold When all of the following conditions are satisfied CAN communication is normal Automatic back door control module receives wake up signal via CAN communication with BCM Automatic back door control module cannot detect ignition switch ON signal via CAN communication with IPDM E/R Diagnosis delay time – B2401–87 IGN OPEN (Ignition open) Diagnosis condition All times Signal (terminal) CAN communication Threshold When automatic back door control module can not communicate CAN communication signal Diagnosis delay time 2 seconds POSSIBLE CAUSE CAN communication system BCM IPDM E/R Automatic back door control module FAIL-SAFEInhibit automatic back door system auto open/close function DTC Confirmation Procedure PERFORM DTC CONFIRMATION PROCEDURE CONSULT Ignition switch ON...

Nissan Murano (Z52) 2015-2024 Service Manual: P0448 Evap Canister Vent Control Valve

DTC Description DTC DETECTION LOGICEVAP canister vent control valve remains closed under specified driving conditions. DTC CONSULT screen terms (Trouble diagnosis content) DTC detection condition P0448 VENT CONTROL VALVE (Evaporative emission system vent control circuit shorted) Diagnosis condition — Signal (terminal) — Threshold EVAP canister vent control valve remains closed under specified driving conditions Diagnosis delay time — POSSIBLE CAUSE EVAP canister vent control valve EVAP control system pressure sensor and the circuit Blocked rubber tube to EVAP canister vent control valve EVAP canister is saturated with water FAIL-SAFENot applicable DTC Confirmation Procedure PRECONDITIONING If DTC Confirmation Procedure has been previously conducted, always perform the following before conducting the next test...