Nissan Murano: Suspension / Rear Suspension :: Unit Disassembly and Assembly. Rear Shock Absorber
| 1. | Rear shock absorber | 2. | Piston rod lock nut | 3. | Shock absorber insulator |
| 4. | Bound bumper |  |
Front |
DISASSEMBLY
CAUTION:
Do not damage the shock absorber piston rod when removing components from the shock absorber.
Remove the cap from the shock absorber insulator.
Wrap a shop cloth around the lower shock absorber bolt flange. Secure the lower shock absorber bolt flange in a vise.
CAUTION:
Do not set the cylindrical part of the rear shock absorber in a vise.
Secure the piston rod tip so that the piston rod does not turn. Remove the piston rod lock nut.
Remove the shock absorber insulator and the bound bumper from the rear shock absorber.
ASSEMBLY
Assembly is in the reverse order of disassembly.
CAUTION:
Do not reuse the piston rod lock nut.
Rear Suspension :: Unit Removal and Installation. Rear Suspension Member
Exploded View
1.
Rear suspension member
2.
Rear suspension member stay
3.
Rear suspension member stopper
Front
Removal and Installation
REMOVALRemove the front under cover...
Rear Suspension :: Service Data and Specifications (sds). Service Data and Specifications (sds)
Wheel Alignment (Unladen)
Item Standard
Camber
Degree minute (Decimal degree)
Minimum
–1° 30′ 00″ (–1.50°)
Nominal
–0° 45′ 00″ (–0...
Other information:
Nissan Murano (Z52) 2015-2024 Service Manual: Evap Canister
Exploded View EVAP CANISTER 1. EVAP canister control pressure sensor 2. EVAP canister 3. Shield 4. Clamp 5. EVAP canister purge hose 6. EVAP canister vent line 7. EVAP canister vent control valve hose 8. EVAP canister vent control valve A...
Nissan Murano (Z52) 2015-2024 Service Manual: Electric Controlled Coupling
Exploded View Stud bolt Connector bracket Reamer bolt Electric controlled coupling assembly Wave spring Drive pinion oil seal Drive pinion lock nut Pinion front bearing Gear carrier Collapsible spacer Drive pinion adjusting shim Pinion rear bearing Drive pinion Drive gear Differential case Side bearing Side bearing adjusting shim Side oil seal Rear cover Stud bolt Gasket Drain plug Filler plug Pinion mate thrust washer Pinion mate gear Side gear thrust washer Side gear Pinion mate shaft Lock pin Oil seal lip Screw hole : N·m (kg-m, in-lb) : N·m (kg-m, ft-lb) : Always replace after every disassembly...
Categories
- Manuals Home
- Nissan Murano Owners Manual
- Nissan Murano Service Manual
- How to enable/disable the LDW system
- Fuel recommendation
- GAS STATION INFORMATION
- New on site
- Most important about car
Unfastening the seat belts. Checking seat belt operation
Unfastening the seat belts
To unfasten the seat belt, press the button
on the buckle 
. The seat belt
automatically
retracts.
