Nissan Murano: Transmission & Driveline / Rear Axle :: Precaution. Precautions

Precaution for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT BELT PRE-TENSIONER"

The Supplemental Restraint System such as “AIR BAG” and “SEAT BELT PRE-TENSIONER”, used along with a front seat belt, helps to reduce the risk or severity of injury to the driver and front passenger for certain types of collisions.

Information necessary to service the system safely is included in the “SRS AIR BAG” and “SEAT BELT” sections of this Service Manual.

WARNING:

Always observe the following items for preventing accidental activation:

PRECAUTIONS WHEN USING POWER TOOLS (AIR OR ELECTRIC) AND HAMMERS

WARNING:

Always observe the following items for preventing accidental activation:

Observe the following precautions when disassembling and assembling drive shaft:

• Joint sub-assembly does not disassemble because it is non-overhaul parts.

• Perform work in a location which is as dust-free as possible.

• Before disassembling and assembling, clean the outside of parts.

• Prevention of the entry of foreign objects must be taken into account during disassembly of the service location.

• Disassembled parts must be carefully reassembled in the correct order. If work is interrupted, a clean cover must be placed over parts.

• Paper shop cloths must be used. Fabric shop cloths must not be used because of the danger of lint adhering to parts.

• Disassembled parts (except for rubber parts) should be cleaned with kerosene which shall be removed by blowing with air or wiping with paper shop cloths.