Other information:
Inspection and Repair
INSPECTIONWhen measuring voltage, wrap tin foil around the top of the negative probe. Then press the foil against the wire with your finger.
Attach probe circuit tester (in Volt range) to middle portion of each filament.
If a filament is burned out, circuit tester registers 0 or battery voltage...
DTC Description
DTC DETECTION LOGIC DTC No. CONSULT screen terms (Trouble diagnosis content) DTC Detection Condition
B26F1
IGN RELAY OFF
(Ignition relay off)
Diagnosis condition
When ignition switch ON.
Signal (terminal)
IPDM E/R ignition output 1 (Terminal 70)
Threshold
Less than 8...