Nissan Murano: Brakes / Parking Brake System :: Preparation. Preparation

Nissan Murano (Z52) 2015-2024 Service Manual / Brakes / Parking Brake System :: Preparation. Preparation

Commercial Service Tool

Tool name Description
Brake drum clearance gauge

Measuring rear disc brake rotor drum inner diameter
Power tool

Loosening nuts, screws and bolts

    Parking Brake System :: Precaution. Precautions

    Precaution for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT BELT PRE-TENSIONER" The Supplemental Restraint System such as “AIR BAG” and “SEAT BELT PRE-TENSIONER”, used along with a front seat belt, helps to reduce the risk or severity of injury to the driver and front passenger for certain types of collisions...

    Parking Brake System :: Periodic Maintenance

    ..

    Other information:

    Nissan Murano (Z52) 2015-2024 Service Manual: Engine Control System Symptoms


    Symptom Table SYSTEM — BASIC ENGINE CONTROL SYSTEM  SYMPTOM Reference page HARD/NO START/RESTART (EXCP. HA) ENGINE STALL HESITATION/SURGING/FLAT SPOT SPARK KNOCK/DETONATION LACK OF POWER/POOR ACCELERATION HIGH IDLE/LOW IDLE ROUGH IDLE/HUNTING IDLING VIBRATION SLOW/NO RETURN TO IDLE OVERHEATS/WATER TEMPERATURE HIGH EXCESSIVE FUEL CONSUMPTION EXCESSIVE OIL CONSUMPTION BATTERY DEAD (UNDER CHARGE) Warranty symptom code AA AB AC AD AE AF AG AH AJ AK AL AM HA Fuel Fuel pump circuit 1 1 2 3 2   2 2     3   2 Diagnosis Procedure Fuel pressure regulator system 3 3 4 4 4 4 4 4 4   4     Work Procedure Fuel injector circuit 1 1 2 3 2   2 2     2     Component Function Check Evaporative emission system 3 3 4 4 4 4 4 4 4   4     System Description Air Positive crankcase ventilation system 3 3 4 4 4 4 4 4 4   4 1   Positive Crankcase Ventilation (PCV) Incorrect idle speed adjustment       1 1 1 1   1     Work Procedure Electric throttle control actuator 1 1 2 3 3 2 2 2 2   2   2 DTC Description, DTC Description Ignition Incorrect ignition timing adjustment 3 3 1 1 1   1 1     1     Work Procedure Ignition circuit 1 1 2 2 2   2 2     2     Component Function Check Power supply and ground circuit 2 2 3 3 3   3 3   2 3   Diagnosis Procedure Mass air flow sensor circuit 1 1 2 2 2   2 2     2     DTC Description, DTC Description Engine coolant temperature sensor circuit 3 3 3       DTC Description, DTC Description Air fuel ratio (A/F) sensor 1 circuit             DTC Description, DTC Description, DTC Description, DTC Description, DTC Description Throttle position sensor circuit     2 2       DTC Description, DTC Description, DTC Description, DTC Description, DTC Description Accelerator pedal position sensor circuit     3 2 1             DTC Description, DTC Description, DTC Description, DTC Description Knock sensor circuit     2               3     DTC Description Engine oil temperature sensor 4 2       3     DTC Description, DTC Description Crankshaft position sensor (POS) circuit 2 2           DTC Description Camshaft position sensor (PHASE) circuit 3 2           DTC Description Nissan Murano Vehicle speed signal circuit   2 3   3           3     DTC Description ECM 2 2 3 3 3 3 3 3 3 3 3     DTC Description, DTC Description Intake valve timing control solenoid valve circuit   3 2   1 3 2 2 3   3     DTC Description Intake valve timing intermediate lock control solenoid valve circuit DTC Description Exhaust valve timing control solenoid valve 3 2   1 3 2 2 3   3 DTC Description PNP signal circuit     3   3   3 3     3     DTC Description VIAS control solenoid valve 1 circuit 1 DTC Description VIAS control solenoid valve 2 circuit 1 DTC Description Refrigerant pressure sensor circuit   2   3 3   4     Component Function Check Electrical load signal circuit             3           Component Function Check Air conditioner circuit 2 2 3 3 3 3 3 3 3   3   2 Work Flow ABS actuator and electric unit (control unit) 4 Work Flow 1 - 6: The numbers refer to the order of inspection...

    Nissan Murano (Z52) 2015-2024 Service Manual: Instrument Panel Assembly


    Removal and Installation CAUTION: Be careful not to scratch instrument panel pad and other parts. Whenever a suitable tool is used, always wrap a cloth around the end of the tool to protect components from damage. Before servicing, turn ignition switch OFF, disconnect both battery terminals then wait at least three minutes...

    Categories

    Unfastening the seat belts. Checking seat belt operation

    Unfastening the seat belts

    Nissan Murano. Unfastening the seat belts. Checking seat belt operation

    To unfasten the seat belt, press the button on the buckle Nissan Murano. Unfastening the seat belts. Checking seat belt operation. The seat belt automatically retracts.

    read more

     
    Copyright © 2026 www.nimurano.com