Nissan Murano: Inside Key Antenna / Luggage Room

Nissan Murano (Z52) 2015-2024 Service Manual / Body Exterior, Doors, Roof & Vehicle Security / Door & Lock :: Removal and Installation / Inside Key Antenna / Luggage Room

Removal and Installation

REMOVAL

Fold second row seatback (LH) flat.

Disconnect the harness connector from the inside key antenna [luggage (1)].

Release clips (A) using a suitable tool and remove inside key antenna (luggage).

INSTALLATION

Installation is in the reverse order of removal.

    Console

    Removal and Installation REMOVALRemove center console rear finisher. Refer to Removal and Installation. Remove screws (A), and then remove inside key antenna [console (1)]...

    Outside Key Antenna

    ..

    Other information:

    Nissan Murano (Z52) 2015-2024 Service Manual: Door Motor Communication Circuit


    Diagnosis Procedure NOTE: If all of door motor DTCs are detected, check this circuit. CHECK EACH DOOR MOTOR COMMUNICATION SIGNAL Ignition switch ON. Check output waveform between A/C auto amp. harness connector and ground with the oscilloscope. + − Output waveform A/C auto amp...

    Nissan Murano (Z52) 2015-2024 Service Manual: Can Communication


    System Description CAN (Controller Area Network) is a serial communication line for real time application. It is an on-Nissan Murano vehicle multiplex communication line with high data communication speed and excellent error detection ability. Many electronic control units are equipped onto a Nissan Murano vehicle, and each control unit shares information and links with other control units during operation (not independent)...

    Categories

    read more

     
    Copyright © 2026 www.nimurano.com